Urutan untuk perbaikan sepeda jalan yang lengkap

Saya punya sepeda jalan yang saya rencanakan untuk segera diperbaiki. Selama bertahun-tahun, dan dengan beberapa sepeda, saya telah merombak hampir semua komponen, tetapi tidak pernah berhasil melakukan ini untuk seluruh sepeda, mulai dari selesai.

Apakah ada urutan optimal untuk perbaikan sepeda? Atau apakah itu penting?

Saya memiliki dua tautan daftar periksa perbaikan yang bagus. Salah satu daftar periksa yang saya modifikasi untuk penggunaan pribadi dan sudah termasuk.

Yang pertama adalah dari United Bicycle Institute ( checklist PDF link ) - UBI adalah salah satu sekolah mekanik sepeda utama AS.

Yang di bawah ini saya modifikasi dari blog A Convenient Cycle (blog sekarang sudah mati ...) dan itulah yang saya gunakan di toko pribadi saya.

Wheel Systems:
[ ] Front Hub bearings greased.
[ ] Front Hub bearings adjusted to not be tight or loose.
[ ] Rear Hub bearings greased.
[ ] Rear Hub bearings adjusted to not be tight or loose.
[ ] All hubs locknuts secured.
[ ] Hubs inspected for bent axles and external evidence of internal problems.
[ ] Rims trued laterally to .5mm tolerance or better.
[ ] Rims inspected for damaged or other work needed.
[ ] Tires checked for proper wear and damage, proper mounting, and inflation.
[ ] Wheels mounted in proper alignment and secure.

Drive Train System:
[ ] Bottom Bracket greased
[ ] Bottom Bracket fixed cup secured.
[ ] Bottom Bracket fixed cup secured.
[ ] Bottom Bracket adjusted to not be tight or loose.
[ ] Bottom Bracket inspected for external evidence of internal problems.
[ ] Crank arms securely mounted.
[ ] Chainrings bolts secured.
[ ] Wobbling chainrings aligned.
[ ] Pedals lubricated
[ ] Pedals securely mounted.
[ ] Chain cleaned
[ ] Chain lubed and whipped down
[ ] Chain inspected for wear
[ ] Freewheel cleaned and rinsed
[ ] Freewheel inspected for wear
[ ] Freewheel lubricated.

Brake System:
[ ] Cables lubricated and replaced if worn.
[ ] Front Braking surface cleaned and checked for ware.
[ ] Rear Braking surface cleaned and checked for ware.
[ ] Brake calipers checked for mounting security.
[ ] Caliper arms and pivot/mounting bolts checked for damage.
[ ] Adjustable brake pivots adjusted for no play or binding.
[ ] Pivot nut/bolts checked for secure.
[ ] Brake caliper lubricated at pivots, springs, and cable adjuster barrels.
[ ] Brake barrels adjusters reseted.
[ ] Brake pads checked for wear and replaced if more than 50% worn.
[ ] Brake pad height set so as not to rub tire or hit partially below rim.
[ ] Pads set tangent [parallel] to rim.
[ ] New pads set with .5mm to 1.5mm toe to reduce squeal.
[ ] Pads clearance set to 1mm -2mm per side [except MTB type].
[ ] MTB pad clearance set so that when the pads contact the rim the lever clears the handlebar by a minimum of 1 inch.
[ ] Brake levers set to proper alignment and secure.
[ ] Brake level pivots, cable anchor pivots, and cable adjusters lubricated.
[ ] Cable removed and inspected for rust, frays, and kinks in the inner wire and housing.
[ ] Housings sized to proper length and ends finished with filing and end caps where fit.
[ ] Cables lubricated wherever they pass through housings.
[ ] Cable system stress tested by pulling brake lever fully to handlebar a minimum of ten times.
[ ] Cable end finished with cap or soldering.
[ ] Rims cleaned of lubricants and road grime.

Shift Systems:
[ ] Cables lubed and replaced if necessary
[ ] Rear derailleur removed and hanger checked for proper alignment.
[ ] Rear derailleur pivots, cable adjusters, and jockey wheels lubricated.
[ ] Rear derailleur inspected for damage and worn jockey wheels.
[ ] Rear derailleur mounted securely.
[ ] Front derailleur checked for proper mounting height and rotation.
[ ] Front derailleur checked for proper secure mounting.
[ ] Front derailleur pivots lubricated.
[ ] Derailleur cables removed and inspected for rust, frays, and kinks in the inner wires and housings.
[ ] Housings sized to proper length and ends finished with filing and end caps wherever they improve fit.
[ ] Cables lubricated wherever they pass through housings when appropriate.
[ ] Cables pre-stressed.
[ ] Chain length checked.
[ ] Rear derailleur limit screws set to allow shift to largest and smallest sprockets.
[ ] Rear derailleur checked for over shift at all gear combinations.
[ ] Front derailleur limit screws set for minimum clearance of the derailleur cage to the chain in high and low gear.
[ ] Front derailleur checked for over shift at all gear combinations.

Steering System:
[ ] Headset lubricated.
[ ] Headset adjusted to not be tight or loose.
[ ] Headset locknut secured.
[ ] Headset inspected for external evidence of damage, wear, or loose cups.
[ ] Fork inspected for damage.
[ ] Stem inspected for proper depth insertion, alignment, and secure.
[ ] Handlebars inspected for damage, proper alignment, and secure.

Miscellaneous:
[ ] Frame checked for damage.
[ ] Seat post checked for allowable minimum depth of insertion.
[ ] Seat post secure mounting checked.
[ ] Seat checked for proper alignment and secure mounting.
[ ] Accessories checked for mounting security and interference with moving parts or safety hazards.

Test Ride:
[ ] Brakes checked for stopping power and squeal.
[ ] Bicycle checked for tracking problems.
[ ] Derailleurs checked for performance and over shift.
[ ] Chain and freewheel cogs checked for skipping under load.
[ ] Bicycle checked for unusual noises.

Saya biasanya mulai dengan melepas bingkai ke bawah. Saya akan membiarkan kabel menyala jika saya tidak pergi sejauh itu tetapi setidaknya mengambil headset terpisah dan mengeluarkan BB. Setelah saya sampai sejauh itu, saya akan menghabisi frame kemudian pindah ke roda. Tarik keluar bantalan dan periksa bola, dapatkan yang baru jika perlu dan kemas kembali hub. Saya juga membersihkan kaset pada saat ini karena sebagian besar terpisah.

Saya tidak pernah memiliki pedal yang membutuhkan pembangunan kembali tetapi saya kira saya akan melakukannya setelah saya menghidupkan kembali engkol.

Kemudian kembalikan.

Melihat tautan di OP tidak berfungsi, inilah daftar periksa teks, dan inilah PDF :

[ ] Front Hub berings greased.
[ ] Front Hub berings adjusted to not be tight or loose.
[ ] Rear Hub berings greased.
[ ] Rear Hub berings adjusted to not be tight or loose.
[ ] All hubs locknuts secured.
[ ] Hubs inspected for bent axles and external evidence of internal problems.
[ ] Rims trued laterally to .5mm tolerance or better.
[ ] Rims inspected for damaged or other work needed.
[ ] Tires checked for proper wear and damage, proper mounting, and inflation.
[ ] Wheels mounted in proper alignment and secure.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention.
Drive Train System:
[ ] Bottom Bracket greased
[ ] Bottom Bracket fixed cup secured.
[ ] Bottom Bracket fixed cup secured.
[ ] Bottom Bracket adjusted to not be tight or loose.
[ ] Bottom Bracket inspected for external evidence of internal problems.
[ ] Crank arms securely mounted.
[ ] Chainrings bolts secured.
[ ] Wobbling chainrings aligned.
[ ] Pedals lubricated
[ ] Pedals securely mounted.
[ ] Chain cleaned
[ ] Chain lubed and whipped down
[ ] Chain inspected for wear
[ ] Freewheel cleaned and rinsed
[ ] Freewheel inspected for wear
[ ] Freewheel lubricated.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention.
Steering System:
[ ] Headset lubricated.
[ ] Headset adjusted to not be tight or loose.
[ ] Headset locknut secured.
[ ] Headset inspected for external evidence of damage, wear, or loose cups.
[ ] Fork inspected for damage.
[ ] Stem inspected for proper depth insertion, alignment, and secure.
[ ] Handlebars inspected for damage, proper alignment, and secure.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention.
Brake System:
[ ] Cables lubricated and replaced if worn.
[ ] Front Braking surface cleaned and checked for ware.
[ ] Rear Braking surface cleaned and checked for ware.
[ ] Brake calipers checked for mounting security.
[ ] Caliper arms and pivot/mounting bolts checked for damage.
[ ] Adjustable brake pivots adjusted for no play or binding.
[ ] Pivot nut/bolts checked for secure.
[ ] Brake caliper lubricated at pivots, springs, and cable adjuster barrels.
[ ] Brake barrels adjusters reseted.
[ ] Brake pads checked for wear and replaced if more than 50% worn.
[ ] Brake pad height set so as not to rub tire or hit partially below rim.
[ ] Pads set tangent [parallel] to rim.
[ ] New pads set with .5mm to 1.5mm toe to reduce squeal.
[ ] Pads clearance set to 1mm -2mm per side [except MTB type].
[ ] MTB pad clearance set so that when the pads contact the rim the lever clears the handlebar by a minimum of 1 inch.
[ ] Brake levers set to proper alignment and secure.
[ ] Brake level pivots, cable anchor pivots, and cable adjusters lubricated.
[ ] Cable removed and inspected for rust, frays, and kinks in the inner wire and housing.
[ ] Housings sized to proper length and ends finished with filing and end caps where fit.
[ ] Cables lubricated wherever they pass through housings.
[ ] Cable system stress tested by pulling brake lever fully to handlebar a minimum of ten times.
[ ] Cable end finished with cap or soldering.
[ ] Rims cleaned of lubricants and road grime.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention
Shift Systems:
[ ] Cables lubed and replaced if necessary
[ ] Rear derailleur removed and hanger checked for proper alignment.
[ ] Rear derailleur pivots, cable adjusters, and jockey wheels lubricated.
[ ] Rear derailleur inspected for damage and worn jockey wheels.
[ ] Rear derailleur mounted securely.
[ ] Front derailleur checked for proper mounting height and rotation.
[ ] Front derailleur checked for proper secure mounting.
[ ] Front derailleur pivots lubricated.
[ ] Derailleur cables removed and inspected for rust, frays, and kinks in the inner wires and housings.
[ ] Housings sized to proper length and ends finished with filing and end caps wherever they improve fit.
[ ] Cables lubricated wherever they pass through housings when appropriate.
[ ] Cables pre-stressed.
[ ] Chain length checked.
[ ] Rear derailleur limit screws set to allow shift to largest and smallest sprockets.
[ ] Rear derailleur checked for over shift at all gear combinations.
[ ] Front derailleur limit screws set for minimum clearance of the derailleur cage to the chain in high and low gear.
[ ] Front derailleur checked for over shift at all gear combinations.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention
Miscellaneous:
[ ] Frame checked for damage.
[ ] Seat post checked for allowable minimum depth of insertion.
[ ] Seat post secure mounting checked.
[ ] Seat checked for proper alignment and secure mounting.
[ ] Accessories checked for mounting security and interference with moving parts or safety hazards.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention
Test Ride:
[ ] Frame cleaned.
[ ] Frame waxed.
[ ] Frame checked for damage.
[ ] Brakes checked for stopping power and squeal.
[ ] Bicycle checked for tracking problems.
[ ] Derailleurs checked for performance and over shift.
[ ] Chain and freewheel cogs checked for skipping under load.
[ ] Bicycle checked for unusual noises.
Notes: These problems could not be repaired and/or are in need of further attention;

Saya mulai dengan cek M dasar - apa yang salah dengan sepeda. Buat daftar hal-hal yang perlu dilakukan. Itu berarti inspeksi dekat frame untuk kerusakan / retakan - jika frame adalah write off sepeda hanya merupakan bagian donor dan dilucuti.

Saya mulai dengan menghapus semua bit buruk dan memutuskan apakah mereka bisa diperbaiki setelah membangun kembali atau jika mereka perlu diganti.

Setelah semuanya mati dari sepeda yang tidak berfungsi, saya membuat keputusan tentang apakah nilainya diperbaiki sama sekali. Hindari tenggelam banyak waktu ke dalam sepeda jika marjinal. Ada banyak sepeda di luar sana, dan sementara sentimentalitas dan sejarah membantu memindahkan batas Anda masih harus selektif.

Bekerja pada setiap subsistem secara bergantian. Yaitu saya akan membuat BB sempurna dan kemudian beralih ke engkol. Kemudian roda belakang, kaset, derailleurs, rantai.

Selalu bersihkan barang sebelum mengerjakannya. Sepeda yang bersih lebih baik untuk digunakan. Jadi lakukan bagian-bagian yang kotor terlebih dahulu - yaitu transmisi, hub roda, roda truing dll.

Biarkan detail finishing sampai nanti. Pelana, bartape, reflektor, kabel bagian dalam untuk rem / pemindah, dan rem menuju akhir urutan.

Akhirnya, uji sepeda. Anda harus mengendarainya selama beberapa menit, lambat pada awalnya lalu bangun untuk mempercepat dan menguji rem dan bergeser.

Setelah 4-6 minggu, Anda akan ingin mengubah rem dan kabel shifter juga - mereka bed-in dengan penggunaan.