Berfungsi untuk menghitung jarak antara dua koordinat

Saat ini saya menggunakan fungsi di bawah ini dan tidak berfungsi dengan baik. Menurut Google Maps, jarak antara koordinat ini (dari 59.3293371,13.4877472ke 59.3225525,13.4619422) adalah 2.2kilometer sementara fungsi mengembalikan 1.6kilometer. Bagaimana saya bisa membuat fungsi ini mengembalikan jarak yang benar?

function getDistanceFromLatLonInKm(lat1, lon1, lat2, lon2) {
  var R = 6371; // Radius of the earth in km
  var dLat = deg2rad(lat2-lat1);  // deg2rad below
  var dLon = deg2rad(lon2-lon1); 
  var a = 
    Math.sin(dLat/2) * Math.sin(dLat/2) +
    Math.cos(deg2rad(lat1)) * Math.cos(deg2rad(lat2)) * 
    Math.sin(dLon/2) * Math.sin(dLon/2)
    ; 
  var c = 2 * Math.atan2(Math.sqrt(a), Math.sqrt(1-a)); 
  var d = R * c; // Distance in km
  return d;
}

function deg2rad(deg) {
  return deg * (Math.PI/180)
}

jsFiddle: http://jsfiddle.net/edgren/gAHJB/

Apa yang Anda gunakan disebut rumus haversine , yang menghitung jarak antara dua titik pada bola saat gagak terbang . Tautan Google Maps yang Anda berikan menunjukkan jarak sejauh 2,2 km karena itu bukan garis lurus.

Wolphram Alpha adalah sumber yang bagus untuk melakukan perhitungan geografis, dan juga menunjukkan jarak 1,652 km antara dua titik ini .

Jika Anda mencari jarak garis lurus (sebagai file gagak), fungsi Anda berfungsi dengan benar. Jika yang Anda inginkan adalah jarak mengemudi (atau jarak bersepeda atau jarak transportasi umum atau jarak berjalan kaki), Anda harus menggunakan API pemetaan ( Google atau Bing yang paling populer) untuk mendapatkan rute yang sesuai, yang akan mencakup jarak tersebut.

Kebetulan, Google Maps API menyediakan metode paket untuk jarak bulat, di google.maps.geometry.sphericalnamespace -nya (cari computeDistanceBetween). Ini mungkin lebih baik daripada menggulirkan sendiri (sebagai permulaan, ia menggunakan nilai yang lebih tepat untuk jari-jari Bumi).

Untuk pemilih di antara kita, ketika saya mengatakan "jarak garis lurus", saya mengacu pada "garis lurus pada bola", yang sebenarnya merupakan garis lengkung (yaitu jarak lingkaran besar), tentu saja.

Saya telah menulis persamaan yang sama sebelum - mengujinya dan juga mendapat 1,6 km.

Peta google Anda menunjukkan jarak MENGEMUDI.

Fungsi Anda menghitung ketika gagak terbang (jarak garis lurus).

alert(calcCrow(59.3293371,13.4877472,59.3225525,13.4619422).toFixed(1));



    //This function takes in latitude and longitude of two location and returns the distance between them as the crow flies (in km)
    function calcCrow(lat1, lon1, lat2, lon2) 
    {
      var R = 6371; // km
      var dLat = toRad(lat2-lat1);
      var dLon = toRad(lon2-lon1);
      var lat1 = toRad(lat1);
      var lat2 = toRad(lat2);

      var a = Math.sin(dLat/2) * Math.sin(dLat/2) +
        Math.sin(dLon/2) * Math.sin(dLon/2) * Math.cos(lat1) * Math.cos(lat2); 
      var c = 2 * Math.atan2(Math.sqrt(a), Math.sqrt(1-a)); 
      var d = R * c;
      return d;
    }

    // Converts numeric degrees to radians
    function toRad(Value) 
    {
        return Value * Math.PI / 180;
    }

Solusi Derek bekerja dengan baik untuk saya, dan saya baru saja mengubahnya menjadi PHP, semoga membantu seseorang di luar sana!

function calcCrow($lat1, $lon1, $lat2, $lon2){
        $R = 6371; // km
        $dLat = toRad($lat2-$lat1);
        $dLon = toRad($lon2-$lon1);
        $lat1 = toRad($lat1);
        $lat2 = toRad($lat2);

        $a = sin($dLat/2) * sin($dLat/2) +sin($dLon/2) * sin($dLon/2) * cos($lat1) * cos($lat2); 
        $c = 2 * atan2(sqrt($a), sqrt(1-$a)); 
        $d = $R * $c;
        return $d;
}

// Converts numeric degrees to radians
function toRad($Value) 
{
    return $Value * pi() / 180;
}

Coba ini. Itu ada di VB.net dan Anda perlu mengubahnya ke Javascript. Fungsi ini menerima parameter dalam menit desimal.

    Private Function calculateDistance(ByVal long1 As String, ByVal lat1 As String, ByVal long2 As String, ByVal lat2 As String) As Double
    long1 = Double.Parse(long1)
    lat1 = Double.Parse(lat1)
    long2 = Double.Parse(long2)
    lat2 = Double.Parse(lat2)

    'conversion to radian
    lat1 = (lat1 * 2.0 * Math.PI) / 60.0 / 360.0
    long1 = (long1 * 2.0 * Math.PI) / 60.0 / 360.0
    lat2 = (lat2 * 2.0 * Math.PI) / 60.0 / 360.0
    long2 = (long2 * 2.0 * Math.PI) / 60.0 / 360.0

    ' use to different earth axis length
    Dim a As Double = 6378137.0        ' Earth Major Axis (WGS84)
    Dim b As Double = 6356752.3142     ' Minor Axis
    Dim f As Double = (a - b) / a        ' "Flattening"
    Dim e As Double = 2.0 * f - f * f      ' "Eccentricity"

    Dim beta As Double = (a / Math.Sqrt(1.0 - e * Math.Sin(lat1) * Math.Sin(lat1)))
    Dim cos As Double = Math.Cos(lat1)
    Dim x As Double = beta * cos * Math.Cos(long1)
    Dim y As Double = beta * cos * Math.Sin(long1)
    Dim z As Double = beta * (1 - e) * Math.Sin(lat1)

    beta = (a / Math.Sqrt(1.0 - e * Math.Sin(lat2) * Math.Sin(lat2)))
    cos = Math.Cos(lat2)
    x -= (beta * cos * Math.Cos(long2))
    y -= (beta * cos * Math.Sin(long2))
    z -= (beta * (1 - e) * Math.Sin(lat2))

    Return Math.Sqrt((x * x) + (y * y) + (z * z))
End Function

Edit Fungsi yang dikonversi dalam javascript

function calculateDistance(lat1, long1, lat2, long2)
  {    

      //radians
      lat1 = (lat1 * 2.0 * Math.PI) / 60.0 / 360.0;      
      long1 = (long1 * 2.0 * Math.PI) / 60.0 / 360.0;    
      lat2 = (lat2 * 2.0 * Math.PI) / 60.0 / 360.0;   
      long2 = (long2 * 2.0 * Math.PI) / 60.0 / 360.0;       


      // use to different earth axis length    
      var a = 6378137.0;        // Earth Major Axis (WGS84)    
      var b = 6356752.3142;     // Minor Axis    
      var f = (a-b) / a;        // "Flattening"    
      var e = 2.0*f - f*f;      // "Eccentricity"      

      var beta = (a / Math.sqrt( 1.0 - e * Math.sin( lat1 ) * Math.sin( lat1 )));    
      var cos = Math.cos( lat1 );    
      var x = beta * cos * Math.cos( long1 );    
      var y = beta * cos * Math.sin( long1 );    
      var z = beta * ( 1 - e ) * Math.sin( lat1 );      

      beta = ( a / Math.sqrt( 1.0 -  e * Math.sin( lat2 ) * Math.sin( lat2 )));    
      cos = Math.cos( lat2 );   
      x -= (beta * cos * Math.cos( long2 ));    
      y -= (beta * cos * Math.sin( long2 ));    
      z -= (beta * (1 - e) * Math.sin( lat2 ));       

      return (Math.sqrt( (x*x) + (y*y) + (z*z) )/1000);  
    }

Hitung Jarak antara Dua Poin dalam javascript

function distance(lat1, lon1, lat2, lon2, unit) {
        var radlat1 = Math.PI * lat1/180
        var radlat2 = Math.PI * lat2/180
        var theta = lon1-lon2
        var radtheta = Math.PI * theta/180
        var dist = Math.sin(radlat1) * Math.sin(radlat2) + Math.cos(radlat1) * Math.cos(radlat2) * Math.cos(radtheta);
        dist = Math.acos(dist)
        dist = dist * 180/Math.PI
        dist = dist * 60 * 1.1515
        if (unit=="K") { dist = dist * 1.609344 }
        if (unit=="N") { dist = dist * 0.8684 }
        return dist
}

Untuk lebih jelasnya lihat ini: Tautan Referensi

Menggunakan rumus Haversine, sumber kode :

//:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
//:::                                                                         :::
//:::  This routine calculates the distance between two points (given the     :::
//:::  latitude/longitude of those points). It is being used to calculate     :::
//:::  the distance between two locations using GeoDataSource (TM) prodducts  :::
//:::                                                                         :::
//:::  Definitions:                                                           :::
//:::    South latitudes are negative, east longitudes are positive           :::
//:::                                                                         :::
//:::  Passed to function:                                                    :::
//:::    lat1, lon1 = Latitude and Longitude of point 1 (in decimal degrees)  :::
//:::    lat2, lon2 = Latitude and Longitude of point 2 (in decimal degrees)  :::
//:::    unit = the unit you desire for results                               :::
//:::           where: 'M' is statute miles (default)                         :::
//:::                  'K' is kilometers                                      :::
//:::                  'N' is nautical miles                                  :::
//:::                                                                         :::
//:::  Worldwide cities and other features databases with latitude longitude  :::
//:::  are available at https://www.geodatasource.com                         :::
//:::                                                                         :::
//:::  For enquiries, please contact sales@geodatasource.com                  :::
//:::                                                                         :::
//:::  Official Web site: https://www.geodatasource.com                       :::
//:::                                                                         :::
//:::               GeoDataSource.com (C) All Rights Reserved 2018            :::
//:::                                                                         :::
//:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

function distance(lat1, lon1, lat2, lon2, unit) {
    if ((lat1 == lat2) && (lon1 == lon2)) {
        return 0;
    }
    else {
        var radlat1 = Math.PI * lat1/180;
        var radlat2 = Math.PI * lat2/180;
        var theta = lon1-lon2;
        var radtheta = Math.PI * theta/180;
        var dist = Math.sin(radlat1) * Math.sin(radlat2) + Math.cos(radlat1) * Math.cos(radlat2) * Math.cos(radtheta);
        if (dist > 1) {
            dist = 1;
        }
        dist = Math.acos(dist);
        dist = dist * 180/Math.PI;
        dist = dist * 60 * 1.1515;
        if (unit=="K") { dist = dist * 1.609344 }
        if (unit=="N") { dist = dist * 0.8684 }
        return dist;
    }
}

Kode sampel dilisensikan di bawah LGPLv3.

Saya telah menulis fungsi untuk menemukan jarak antara dua koordinat. Ini akan mengembalikan jarak dalam meter.

 function findDistance() {
   var R = 6371e3; // R is earth’s radius
   var lat1 = 23.18489670753479; // starting point lat
   var lat2 = 32.726601;         // ending point lat
   var lon1 = 72.62524545192719; // starting point lon
   var lon2 = 74.857025;         // ending point lon
   var lat1radians = toRadians(lat1);
   var lat2radians = toRadians(lat2);

   var latRadians = toRadians(lat2-lat1);
   var lonRadians = toRadians(lon2-lon1);

   var a = Math.sin(latRadians/2) * Math.sin(latRadians/2) +
        Math.cos(lat1radians) * Math.cos(lat2radians) *
        Math.sin(lonRadians/2) * Math.sin(lonRadians/2);
   var c = 2 * Math.atan2(Math.sqrt(a), Math.sqrt(1-a));

   var d = R * c;

   console.log(d)
}

function toRadians(val){
    var PI = 3.1415926535;
    return val / 180.0 * PI;
}

Great-circle distance - Dari panjang akor

Inilah solusi elegan menerapkan pola desain strategi; Saya harap ini cukup mudah dibaca.

TwoPointsDistanceCalculatorStrategy.js :

module.exports = () =>

class TwoPointsDistanceCalculatorStrategy {

    constructor() {}

    calculateDistance({ point1Coordinates, point2Coordinates }) {}
};

GreatCircleTwoPointsDistanceCalculatorStrategy.js:

module.exports = ({ TwoPointsDistanceCalculatorStrategy }) =>

class GreatCircleTwoPointsDistanceCalculatorStrategy extends TwoPointsDistanceCalculatorStrategy {

    constructor() {
        super();
    }

    /**
     * Following the algorithm documented here: 
     * https://en.wikipedia.org/wiki/Great-circle_distance#Computational_formulas
     * 
     * @param {object} inputs
     * @param {array} inputs.point1Coordinates
     * @param {array} inputs.point2Coordinates
     * 
     * @returns {decimal} distance in kelometers
     */
    calculateDistance({ point1Coordinates, point2Coordinates }) {

        const convertDegreesToRadians = require('../convert-degrees-to-radians');
        const EARTH_RADIUS = 6371;   // in kelometers

        const [lat1 = 0, lon1 = 0] = point1Coordinates;
        const [lat2 = 0, lon2 = 0] = point2Coordinates;

        const radianLat1 = convertDegreesToRadians({ degrees: lat1 });
        const radianLon1 = convertDegreesToRadians({ degrees: lon1 });
        const radianLat2 = convertDegreesToRadians({ degrees: lat2 });
        const radianLon2 = convertDegreesToRadians({ degrees: lon2 });

        const centralAngle = _computeCentralAngle({ 
            lat1: radianLat1, lon1: radianLon1, 
            lat2: radianLat2, lon2: radianLon2, 
        });

        const distance = EARTH_RADIUS * centralAngle;

        return distance;
    }
};


/**
 * 
 * @param {object} inputs
 * @param {decimal} inputs.lat1
 * @param {decimal} inputs.lon1
 * @param {decimal} inputs.lat2
 * @param {decimal} inputs.lon2
 * 
 * @returns {decimal} centralAngle
 */
function _computeCentralAngle({ lat1, lon1, lat2, lon2 }) {

    const chordLength = _computeChordLength({ lat1, lon1, lat2, lon2 });
    const centralAngle = 2 * Math.asin(chordLength / 2);

    return centralAngle;
}


/**
 * 
 * @param {object} inputs
 * @param {decimal} inputs.lat1
 * @param {decimal} inputs.lon1
 * @param {decimal} inputs.lat2
 * @param {decimal} inputs.lon2
 * 
 * @returns {decimal} chordLength
 */
function _computeChordLength({ lat1, lon1, lat2, lon2 }) {

    const { sin, cos, pow, sqrt } = Math;

    const ΔX = cos(lat2) * cos(lon2) - cos(lat1) * cos(lon1);
    const ΔY = cos(lat2) * sin(lon2) - cos(lat1) * sin(lon1);
    const ΔZ = sin(lat2) - sin(lat1);

    const ΔXSquare = pow(ΔX, 2);
    const ΔYSquare = pow(ΔY, 2);
    const ΔZSquare = pow(ΔZ, 2);

    const chordLength = sqrt(ΔXSquare + ΔYSquare + ΔZSquare);

    return chordLength;
}

convert-degrees-to-radian.js:

module.exports = function convertDegreesToRadians({ degrees }) {

    return degrees * Math.PI / 180;
};

Ini mengikuti jarak Great-circle - Dari panjang chord, didokumentasikan di sini .

Kunjungi alamat ini. https://www.movable-type.co.uk/scripts/latlong.html Anda dapat menggunakan kode ini:

JavaScript:     

const R = 6371e3; // metres
const φ1 = lat1 * Math.PI/180; // φ, λ in radians
const φ2 = lat2 * Math.PI/180;
const Δφ = (lat2-lat1) * Math.PI/180;
const Δλ = (lon2-lon1) * Math.PI/180;

const a = Math.sin(Δφ/2) * Math.sin(Δφ/2) +
          Math.cos(φ1) * Math.cos(φ2) *
          Math.sin(Δλ/2) * Math.sin(Δλ/2);
const c = 2 * Math.atan2(Math.sqrt(a), Math.sqrt(1-a));

const d = R * c; // in metres