jQuery 1.5 menambahkan "Objek yang Ditunda". Apa itu, dan apa sebenarnya yang mereka lakukan?
jQuery 1.5 menambahkan "Objek yang Ditunda". Apa itu, dan apa sebenarnya yang mereka lakukan?
Jawaban:
Objek yang Ditunda
Mulai jQuery 1.5, objek Deferred menyediakan cara untuk mendaftarkan beberapa callback ke antrean callback yang dikelola sendiri, memanggil antrean callback yang sesuai, dan menyampaikan status keberhasilan atau kegagalan fungsi sinkron atau asinkron.
Metode yang Ditangguhkan:
Ditunda Dalam Tindakan:
$.get("test.php").done(
function(){ alert("$.get succeeded"); }
);
$.get("test.php")
.done(function(){ alert("$.get succeeded"); })
.fail(function(){ alert("$.get failed!"); });Dan tampaknya callback metode ajax () yang ada bisa dirantai daripada dideklarasikan di pengaturan:
var jqxhr = $.ajax({ url: "example.php" })
.success(function() { alert("success"); })
.error(function() { alert("error"); })
.complete(function() { alert("complete"); });Contoh Kerja Dari entri blog Eric Hynds : http://jsfiddle.net/ehynds/Mrqf8/
jqXHR
Mulai jQuery 1.5, metode $ .ajax () mengembalikan objek jXHR, yang merupakan superset dari objek XMLHTTPRequest. Untuk informasi selengkapnya, lihat bagian jXHR dari entri $ .ajax
Dari JQUERY 1.5 RELEASED :
BENDA TERTENTU
Bersamaan dengan penulisan ulang modul Ajax, fitur baru diperkenalkan yang juga tersedia untuk umum: Deferred Objects . API ini memungkinkan Anda untuk bekerja dengan nilai kembalian yang mungkin tidak langsung ada (seperti hasil kembalian dari permintaan Ajax asinkron). Selain itu, ini memberi Anda kemampuan untuk melampirkan beberapa penangan kejadian (sesuatu yang sebelumnya tidak mungkin dilakukan di Ajax API).
Selain itu, Anda dapat membuat objek yang ditangguhkan sendiri menggunakan jQuery.Deferred. Informasi selengkapnya tentang API ini dapat ditemukan di dokumentasi Objek Ditangguhkan .
Eric Hynds telah menulis tutorial yang bagus tentang Menggunakan Deferreds di jQuery 1.5 .
Daripada memberi tahu Anda apa yang dilakukannya, saya akan menunjukkan kepada Anda apa yang dilakukannya dan menjelaskannya.
Salinan sumber terkait jQuery 1.5 dengan penjelasan yang menjelaskan apa yang dilakukannya. Saya pikir sebagian besar komentarnya benar.
Ini mungkin bermanfaat
// promiseMethods. These are the methods you get when you ask for a promise.
// A promise is a "read-only" version
// fullMethods = "then done fail resolve resolveWith reject rejectWith isResolve isRejected promise cancel".split(" ")
// As you can see it removes resolve/reject so you can't actaully trigger a
// anything on the deferred object, only process callbacks when it "finishes".
promiseMethods = "then done fail isResolved isRejected promise".split(" "),
// Create a simple deferred (one callbacks list)
/* Class: _Deferred.
* methods: done, resolve, resolveWith, isResolved
* internal method: cancel
*
* Basically allows you to attach callbacks with the done method.
* Then resolve the deferred action whenever you want with an argument.
* All the callbacks added with done will be called with the resolved argument
* Any callbacks attached after resolvement will fire immediatly.
*
* resolveWith allows you to set the this scope in the callbacks fired.
*
* isResolved just checks whether it's resolved yet.
*
* cancel blocks resolve/resolveWith from firing. the methods added throug
* done will never be called
*/
_Deferred: function () {
var // callbacks list
callbacks = [],
// stored [ context , args ]
// stores the context & args that .resolve was called with
fired,
// to avoid firing when already doing so
firing,
// flag to know if the deferred has been cancelled
// in Deferred cancel gets called after the first resolve call
cancelled,
// the deferred itself
deferred = {
// done( f1, f2, ...)
done: function () {
if (!cancelled) {
var args = arguments,
i, length,
// elem in callback list
elem,
// type of elem in callback list
type,
// cached context & args for when done is called
// after resolve has been
_fired;
// If resolve has been called already
if (fired) {
// mark it locally
_fired = fired;
// set fired to 0. This is neccesary to handle
// how done deals with arrays recursively
// only the original .done call handles fired
// any that unwrap arrays and call recursively
// dont handle the fired.
fired = 0;
}
// for each function append it to the callback list
for (i = 0, length = args.length; i < length; i++) {
elem = args[i];
type = jQuery.type(elem);
// if argument is an array then call done recursively
// effectively unwraps the array
if (type === "array") {
// def.done([f1, f2, f3]) goes to
// def.done(f1, f2, f3) through the apply
deferred.done.apply(deferred, elem);
} else if (type === "function") {
// if its a function add it to the callbacks
callbacks.push(elem);
}
}
// if it's already been resolved then call resolveWith using
// the cahced context and arguments to call the callbacks
// immediatly
if (_fired) {
deferred.resolveWith(_fired[0], _fired[1]);
}
}
return this;
},
// resolve with given context and args
resolveWith: function (context, args) {
// if its been cancelled then we can't resolve
// if it has fired then we can't fire again
// if it's currently firing then we can't fire. This check is
// there because of the try finally block. It ensures we
// cant call resolve between the try & finally in the catch phase.
if (!cancelled && !fired && !firing) {
firing = 1;
// try block because your calling external callbacks
// made by the user which are not bugfree.
// the finally block will always run no matter how bad
// the internal code is.
try {
while (callbacks[0]) {
callbacks.shift().apply(context, args);
}
// cache the content and arguments taht have been called
// and set firing to false.
} finally {
fired = [context, args];
firing = 0;
}
}
return this;
},
// resolve with this as context and given arguments
// just maps to resolveWith, this sets the this scope as normal
// maps to this.promise which is the read only version of Deferred.
resolve: function () {
deferred.resolveWith(jQuery.isFunction(this.promise) ? this.promise() :
this, arguments);
return this;
},
// Has this deferred been resolved?
// checks whether it's firing or if it has fired.
isResolved: function () {
return !!(firing || fired);
},
// Cancels the action. To be used internally
cancel: function () {
cancelled = 1;
callbacks = [];
return this;
}
};
return deferred;
},
/* Class: Deferred.
* methods: then, done, fail, resolve, reject, resolveWith, rejectWith, isResolved,
isRejected, promise
*
* then is a shortcut for both assigning done & fail in one function.
*
* This one has two underlying lists with different semantic meanings. You
* can bind to both the done callbacks and the fail callbacks then either
* resolve or reject your Deferred object.
*
* You can check whether it has been resolved or rejected. useful to see
* Afterwards which one has happened.
*
* Call .promise to return a new object which doesn't have the resolve/reject
* methods on it. This means you can only bind to it and not resolve/reject it.
* This is effectively read-only.
*
*/
// Full fledged deferred (two callbacks list)
Deferred: function (func) {
// the main deferred which deals with the success callbacks
var deferred = jQuery._Deferred(),
// the failure deferred which deals with the rejected callbacks
failDeferred = jQuery._Deferred(),
// the read only promise is cached.
promise;
// Add errorDeferred methods, then and promise
jQuery.extend(deferred, {
// def.then([f1, f2, ...], [g1, g2, ...] is a short hand for
// def.done([f1, f2, ...])
// def.fail([g1, g2, ...])
then: function (doneCallbacks, failCallbacks) {
// fail exists here because this code will only run after
// deferred has been extended.
deferred.done(doneCallbacks).fail(failCallbacks);
return this;
},
// map def.fail to the second underlying deferred callback list
// map all the other methods for rejection/failure to the underlying
// failDeffered object so that Deferred has two callback lists stored
// internally.
fail: failDeferred.done,
rejectWith: failDeferred.resolveWith,
reject: failDeferred.resolve,
isRejected: failDeferred.isResolved,
// Get a promise for this deferred
// If obj is provided, the promise aspect is added to the object
// no clue what to do with "i"
promise: function (obj, i /* internal */ ) {
// if no argument is passed then just extend promise
if (obj == null) {
// if cached return the cache.
if (promise) {
return promise;
}
// set promise & arg to be {}
promise = obj = {};
}
// for each promiseMethods in the read only promise list
i = promiseMethods.length;
while (i--) {
// set the deferred method on the object
obj[promiseMethods[i]] = deferred[promiseMethods[i]];
}
// returns the "read-only" deferred without
// resolve, resolveWith, reject & rejectWith.
// So you cant "resolve" it but only add "done" functions
return obj;
}
});
// Make sure only one callback list will be used
// if either resolve or reject is called cancel both.
// this means that the one that has been called cant be called again
// and the other one will never be called. So only the done or the fail
// methods will ever be called
deferred.then(failDeferred.cancel, deferred.cancel);
// Don't mess with cancel!
// Unexpose cancel
delete deferred.cancel;
// Call given func if any
// function argument to be called. This was passed in. Allows you to
// handle the deferred object after creating a new one, both as this scope
// and as a new argument.
if (func) {
func.call(deferred, deferred);
}
return deferred;
},
/* Method: when
* Arguments: none OR 1 of type(any & !deferred) OR n of type(deferred).
*
* If no arguments are passed then it gets resolved immediatly. A good way to
* call multiple callback functions? Don't really know a good use of $.when()
*
* If one argument is passed and its not a deferred object then it resolves
* immediatly and passes that argument to all the done callbacks attached.
*
* if n arguments are passed of type deferred object then the the done callbacks
* will only fire if all of them succeed. If a single one fails then the
* fail callbacks fire.
*
* Returns a promise read-only deferred object
*/
// Deferred helper
when: function (object) {
var args = arguments,
length = args.length,
// If you pass in a deferred object then set deferred to be the promise
// if you pass in anything else then set deferred to be a new deferred
deferred = length <= 1 && object && jQuery.isFunction(object.promise) ?
object :
jQuery.Deferred(),
// cache the promise
promise = deferred.promise(),
// store an array
resolveArray;
// if multiple objects are passed in
if (length > 1) {
// create an arrey to store of values.
resolveArray = new Array(length);
// for each object that we wait on
jQuery.each(args, function (index, element) {
// when that object resolves then
jQuery.when(element).then(function (value) {
// store value in the array or store an array of values in it
resolveArray[index] = arguments.length > 1 ? slice.call(arguments, 0) :
value;
// if length === 1 then we finished calling them all
if (!--length) {
// resolve the deferred object with the read only promise
// as context and the resolved values array as the argument
deferred.resolveWith(promise, resolveArray);
}
// if any fail then we reject or deferred
}, deferred.reject);
});
// if deferred was newly created but there was only one argument then
// resolve it immediatly with the argument.
} else if (deferred !== object) {
deferred.resolve(object);
}
// return the read-only deferred.
return promise;
},Problem solved. Btw itu sumber 1.5beta saya pikir ada beberapa perubahan di 1.6
Koreksi saya jika saya salah, tetapi baru-baru ini diklik untuk saya bahwa itu pada dasarnya adalah Pelari Tugas Asinkron. Janji adalah kontrak hasil, memastikan Anda menerima ... sesuatu, tetapi tanpa jaminan kapan Anda akan mendapatkannya.
Saat bekerja di Javascript, kami menghadapi situasi di mana pemanggilan fungsi tidak sinkron. Itu adalah aliran fungsi calee (katakanlah X) tidak menunggu fungsi asynchronous yang disebut (Katakanlah Y). Contoh umumnya adalah ketika kita melakukan panggilan ke server untuk mengambil beberapa data dari database atau halaman HTML. Jika panggilan itu tidak asinkron, antarmuka pengguna akan macet menunggu server merespons. Sifat asynchronous ini menyebabkan masalah ketika Anda ingin mengeksekusi sesuatu secara berurutan, misalnya, Anda ingin mencetak sesuatu setelah Y (asynch) selesai mengeksekusi atau selesai mengambil data. Di sini jQuery memberi kita Deffered Object. Pada dasarnya, jQuery telah menangani semua kode boilerplate yang biasanya kami tulis untuk mengatasi situasi ini. Berikut ini contoh sederhananya:
$.ajax({
...
}).done(function(){
//write here what you wish to do when this ajax call is success
}).fail(function(){
//write here what you wish to do on failure of this ajax call
}); //see more on jQuery Deferred pageAnda dapat menulis fungsi deferred (asynch) Anda sendiri
function DoSomethingTimeConsumingAsynch(){
var deferred = $.Deferred();
_.defer(function(){ //I am using underscore, you can also use setTimeout
...
deferred.resolve();//When the process is done successfully
...
deferred.reject(); //When the process has failed
});
return deferred;
}
//HEre how to use your own asynch function
DoSomethingTimeConsumingAsynch()
.done(function(){
//this will be invoked on success
})
.fail(function(){
//this will be invoked on failure
})Saya harap ini membantu.