Gunakan bootdisk ini untuk mem-boot PC dengan OS Windows untuk menghapus LOCALkata sandi akun pengguna, ENABLEatau DISABLEakun pengguna LOCAL, dll.
Anda dapat menggunakan ini jika Anda lupa LOCALkata sandi akun pengguna Windows Anda, Anda telah melakukan reimage / reset pabrik pada OS Windows Anda dan akun tersebut memiliki kata sandi Anda tidak tahu apa itu, dan hal-hal semacam ini sehingga Anda dapat masuk ke Windows karena beberapa akun TANPA kata sandi hanya untuk masuk, dan kemudian mengatur kata sandi dari Panel Kontrol Windows, dll. untuk sesuatu yang Anda ketahui sesudahnya.
LANGKAH DI SINGKAT
Unduh file gambar bootdisk
Bakar file gambar bootdisk ke media (mis. USBAtau CD) untuk mem-boot PC darinya daripada ke hard drive atau Windows.
Masukkan media bootdisk yang baru dibakar ke dalam PC, dan kemudian instruksikan PC untuk mem-boot darinya daripada hard drive internal dengan Windows diinstal.
Ikuti instruksi dari bagian di bawah ini yang diberi label INSTRUCTIONS ONCE BOOTED TOuntuk opsi apa yang harus dipilih, dll. Untuk mengaktifkan akun Windows lokal yang ada dan / atau mengosongkan kata sandi akun dan sebagainya.
Informasi Umum
Sumberdaya: http://pogostick.net/~pnh/ntpasswd/bootdisk.html
Offline Windows Password & Registry Editor, Bootdisk / CD
Saya telah mengumpulkan gambar CD atau USB Drive yang berisi hal-hal yang diperlukan untuk mereset kata sandi pada sebagian besar sistem.
Bootdisk harus mendukung sebagian besar pengontrol disk yang lebih biasa, dan seharusnya memuat secara otomatis sebagian besar. Keyboard PS / 2 dan USB didukung.
Lebih atau kurang diuji dari NT3.5 hingga Windows 8.1, termasuk versi server seperti 2003, 2008 dan 2012. Juga didukung windows 64 bit.
BAHAYA AKAN ROBINSON!
Jika kata sandi disetel ulang pada pengguna yang memiliki file terenkripsi EFS, dan sistemnya adalah XP atau yang lebih baru, semua file yang dienkripsi untuk pengguna tersebut akan TIDAK DAPAT DIMULAI! dan tidak dapat dipulihkan kecuali Anda mengingat kata sandi lama lagi. Jika Anda tidak tahu apakah Anda memiliki file yang dienkripsi atau tidak, Anda kemungkinan besar tidak memilikinya. (kecuali mungkin pada sistem perusahaan)
Silakan lihat Pertanyaan yang Sering Diajukan dan riwayat versi di bawah sebelum mengirim email pertanyaan kepada saya. Terima kasih!
Unduh Bootdisk
Sumberdaya: http://pogostick.net/~pnh/ntpasswd/bootdisk.html
Unduh
Catatan: Beberapa tautan mungkin di luar lokasi.
Rilis CD, lihat di bawah tentang cara menggunakan
Rilis sebelumnya:
File-file di dalam zip USB persis sama dengan pada CD. Lihat di bawah untuk petunjuk tentang cara membuat disk USB dapat di-boot.
Rilis floppy (tidak diperbarui lagi), lihat di bawah tentang cara menggunakannya
Versi sebelumnya kadang-kadang dapat ditemukan di sini (juga situs saya)
CATATAN: Versi sebelum 0704xx akan merusak disk di VISTA / win7 / 8!
Perhatikan bahwa BOOTDISK mengandung kode CRYPTHOGRAPHIC, dan mungkin ilegal untuk mengekspor kembali dari negara Anda.
CARA PENGGUNAAN
Sumberdaya: http://pogostick.net/~pnh/ntpasswd/bootdisk.html
Cara Penggunaan?
Silakan baca walthrough (sekarang agak ketinggalan jaman, maaf) dan FAQ sebelum mengirim saya pertanyaan
Jika Anda memiliki CD atau USB, semua driver disertakan.
Gambaran
- Dapatkan mesin untuk boot dari CD atau drive USB.
- Memuat driver (biasanya otomatis, tetapi memungkinkan untuk menjalankan pemilihan manual)
- Pilih disk, beri tahu disk mana yang berisi sistem Windows. Secara opsional Anda harus memuat driver.
- Pilih PATH, di mana pada disk adalah sistem? (sekarang biasanya otomatis)
- Pilih file, bagian mana dari registri untuk memuat, berdasarkan apa yang ingin Anda lakukan.
- Reset kata sandi atau pengeditan registri lainnya.
- Tulis kembali ke disk (Anda akan ditanya)
JANGAN PANIK !! - Sebagian besar pertanyaan biasanya dapat dijawab dengan jawaban default yang diberikan dalam [kurung]. Cukup tekan enter / kembali untuk menerima jawaban default.
Panduan dan instruksi sekarang ada di halamannya sendiri! tapi sudah cukup lama .. berharap untuk membuat yang baru ..
Apa yang salah?
Baik. Banyak hal, sebenarnya. Tetapi sebagian besar masalah adalah tipe "tidak dapat menemukan" sesuatu. Dan kemudian tidak ada yang terjadi.
Juga, lihat FAQ untuk bantuan dengan masalah umum.
PETUNJUK SEKALI DICARI
Mungkin yang terbaik untuk mencetak instruksi ini dan kemudian mengikuti dari salinan cetak itu — dan mencetak dari versi pada URL sumber daya situs web mungkin juga kalau-kalau mereka memperbarui sesuatu dengan itu sejak setelah posting saya di sini.
Ini adalah detail yang menjelaskan opsi apa yang harus diambil setelah bootdisk mulai booting untuk menemukan dan mengarahkan ke hard drive internal dan memilih objek OS Windows saat ini untuk mengosongkan akun pengguna LOCAL pada OS Windows di hard drive.
Bagian ini mungkin kelihatannya rumit atau terlibat pada awalnya, tetapi biarkan saja bootdisk boot dan lihat layar sampai ia meminta atau menunggu Anda untuk mengatakan apa yang harus dilakukan. Lihatlah petunjuk ini dan pilih saja opsi yang sesuai seperti yang diperintahkan — itu harus masuk akal, jadi bacalah sampai Anda mendapatkannya.
Biasanya Anda akan melakukannya. . .
Sebuah. pilih partisi disk Windows pada hard drive yang diperiksa oleh bootdisk
b. dari daftar nama pengguna yang ditemukannya, ketikkan nama akun yang akan Anda ubah (mis. administrator, jsmith, dll.)
c. dari daftar berikutnya, ia akan memberi tahu Anda jika akun dinonaktifkan, kedaluwarsa, dll. sehingga Anda tahu apa yang akan Anda perlu ubah untuk mengatur ulangnya secara khusus untuk memastikan Anda dapat masuk setelah itu ketika boot kembali ke Windows
d. pada layar berikutnya Anda akan ingin membuka kunci akun, mengosongkan kata sandi pada akun atau mengatur akun sebagai administrator lokal (opsi 1, 3, dan 4).
saya. Anda mungkin perlu melakukan langkah "d." satu kali per tindakan dan kemudian pilih nama pengguna akun lagi untuk tindakan selanjutnya jika perlu lebih dari satu tindakan selesai (mis. kata sandi kosong, buka kunci akun, dll.)
ii. Saya hanya akan menghindari pengaturan kata sandi di sini dan hanya melakukannya melalui Panel Kontrol Windows setelah Anda masuk ke Windows dengan kata sandi kosong sebagai administrator, dll.
e. pastikan Anda memilih "Y" untuk menyimpan perubahan Anda dan kemudian ketika PC reboot, biarkan reboot ke Windows dan kemudian masuk dengan kata sandi kosong ke akun yang Anda ubah dengan bootdisk.
Jika tidak berhasil, boot ke bootdisk dan lakukan lagi, mungkin Anda tidak memilih beberapa opsi sehingga tidak melakukan apa yang Anda harapkan. Karena Anda pabrik menghapus hard drive ini, seharusnya tidak ada banyak bahaya dalam kehilangan apa pun atau merusak apa pun karena Anda hanya akan reimage / factory reset lagi.
Sumberdaya: http://pogostick.net/~pnh/ntpasswd/walkthrough.html
Offline NT Password & Registry Editor, Walkthrough
2014, NOTE: This is now a bit old, some are the same, some look a bit different..
The following is a walkthrough of using the CD to reset one user (admin) on a test Vista computer.
Insert the CD and convince your BIOS that it should boot from it. How to boot from a CD varies from computer make to computer make, so I cannot help you much. Some BIOS shows a boot device select menu if you press ESC, F8, F11 or F12 or something like that during the self test. (some even tell you on the screen what to press)
If it boots, you should see this:
ISOLINUX 3.51 2007-06-10 Copyright (C) 1994-2007 H. Peter Anvin
*************************************************************************** * * * Windows NT/2k/XP/Vista Change Password / Registry Editor / Boot CD * *
* * (c) 1998-2007 Petter Nordahl-Hagen. Distributed under GNU GPL v2 * *
* * DISCLAIMER: THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTIES! * * THE AUTHOR CAN NOT BE HELD RESPONSIBLE FOR ANY DAMAGE * * CAUSED BY THE (MIS)USE OF THIS SOFTWARE
* * * * More info at: http://pogostick.net/~pnh/ntpasswd/ * * Email : pnh@pogostick.net * * * * CD build date: Sun Sep 23 14:15:35 CEST 2007 * ***************************************************************************
Press enter to boot, or give linux kernel boot options first if needed. Some that I have to use once in a while: boot nousb
- to turn off USB if not used and it causes problems boot irqpoll - if some drivers hang with irq problem messages boot nodrivers - skip automatic disk driver loading
boot: Usually just press enter here. If you have linux knowledge, you can tweak kernel options if you need/like.
Then it boots and outputs a lot of kernel messages about your hardware and such.. most if not all are nothing to worry about.
Loading vmlinuz.................. Loading scsi.cgz.........................
Loading initrd.cgz.......... Ready. Linux version 2.6.22.6 (root@athene) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-3mdk))
#2 Sun Sep 9 16:59:48 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000316f0000 (usable) BIOS-e820: 00000000316f0000 - 00000000316ff000 (ACPI data) BIOS-e820: 00000000316ff000 - 0000000031700000 (ACPI NVS) BIOS-e820: 0000000031700000 - 0000000031800000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) 792MB LOWMEM available. Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 202752 early_node_map[1] active PFN ranges
...
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize USB Universal Host Controller Interface driver v3.0 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Using IPI Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 144k freed Booting ntpasswd Mounting: proc sys Ramdisk setup complete, stage separation.. In stage 2 Spawning shells on console 2 - 6 Initialization complete!
** Preparing driver modules to dir /lib/modules/2.6.22.6 input: AT Translated Set 2 keyboard as /class/input/input0
Most of the generic linux boot now done, and we try to load the disk drivers. If you use the floppy version you will be asked to swap floppies at this point. Drivers are then tried based on PCI hardware indentification.
** Will now try to auto-load relevant drivers based on PCI information
---- AUTO DISK DRIVER select ---- --- PROBE FOUND THE FOLLOWING DRIVERS: ata_piix ata_generic mptspi --- TRYING TO LOAD THE DRIVERS ### Loading ata_piix scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011050 irq 14 ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011058 irq 15 ata2.00: ATAPI: VMware Virtual IDE CDROM Drive, 00000001, max UDMA/33 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM NECVMWar VMware IDE CDR10 1.00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 1x/1x xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20
### Loading ata_generic
### Loading mptspi Fusion MPT base driver 3.04.04 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.04 PCI: Found IRQ 9 for device 0000:00:10.0 mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator} scsi2 : ioc0: LSI53C1030, FwRev=01032920h, Ports=1, MaxQ=128, IRQ=9 scsi 2:0:0:0: Direct-Access VMware, VMware Virtual S 1.0 PQ: 0 ANSI: 2 target2:0:0: Beginning Domain Validation target2:0:0: Domain Validation skipping write tests target2:0:0: Ending Domain Validation target2:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127) sd 2:0:0:0: [sda] 83886080 512-byte hardware sectors (42950 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Cache data unavailable sd 2:0:0:0: [sda] Assuming drive cache: write through sd 2:0:0:0: [sda] 83886080 512-byte hardware sectors (42950 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Cache data unavailable sd 2:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 2:0:0:0: [sda] Attached SCSI disk
Most of these messages are from the drivers themselves. Some talk a lot, some doesn't. But all give info on the brand and model and size of the disks found, if any.
------------------------------------------------------------- Driver load done, if none loaded, you may try manual instead.
-------------------------------------------------------------
** If no disk show up, you may have to try again (d option) or manual (m).
You can later load more drivers..
************************************************************************* * Windows Registry Edit Utility Floppy / chntpw * * (c) 1997 - 2007 Petter N Hagen - pnh@pogostick.net * * GNU GPL v2 license, see files on CD * * * * This utility will enable you to change or blank the password of * * any user (incl. administrator) on an Windows NT/2k/XP/Vista * * WITHOUT knowing the old password. * * Unlocking locked/disabled accounts also supported. * * * * It also has a registry editor, and there is now support for * * adding and deleting keys and values. * * * * Tested on: NT3.51 & NT4: Workstation, Server, PDC. * * Win2k Prof & Server to SP4. Cannot change AD. * * XP Home & Prof: up to SP2 * * Win 2003 Server (cannot change AD passwords) * * Vista 32 and 64 bit * * * * HINT: If things scroll by too fast, press SHIFT-PGUP/PGDOWN ... * *************************************************************************
========================================================= There are several steps to go through:
- Disk select with optional loading of disk drivers
- PATH select, where are the Windows systems files stored
- File-select, what parts of registry we need
- Then finally the password change or registry edit itself
- If changes were made, write them back to disk
DON'T PANIC! Usually the defaults are OK, just press enter
all the way through the questions
========================================================= ¤ Step ONE: Select disk where the Windows installation is
=========================================================
Disks: Disk /dev/sda: 42.9 GB, 42949672960 bytes
Candidate Windows partitions found: 1 : /dev/sda1 40958MB BOOT
Here it has found one disk with one partition
Please select partition by number or q = quit d = automatically start disk drivers m = manually select disk drivers to load f = fetch additional drivers from floppy / usb a = show all partitions found l = show propbable Windows (NTFS) partitions only Select: [1]
Here you select one of the partitions listed above (in this case there is only one) or one of the letters from the menu.
Floppy users may need to do 'f' to load in more drivers from another floppy.
The 'd' option will re-run the PCI scan and start relevant drivers (they must already be loaded from floppy with 'f' option)
The 'm' for manual load will present a list of all the drivers with short description if available, and allow you to specify which to load. (Dependecies are handled automatically)
Here we only have one partition, so we just press enter to select it.
Selected 1
Mounting from /dev/sda1, with filesystem type NTFS
NTFS volume version 3.1.
It was an NTFS filesystem, and it mounted successfully.
========================================================= ¤ Step TWO: Select PATH and registry files
========================================================= What is the path to the registry directory? (relative to windows disk) [WINDOWS/system32/config] :
The registry is usually system32/config under WINDOWS or WINNT directory, depending on the windows version (and it may be changed during installation). If the correct partition has been selected, the default prompt will be adjusted to match if it can find one of the usual variants.
We accept the defaults.. and get a (bit filtered) directory listing showing most of the interesting registry files
-rw------- 2 0 0 262144 Feb 28 2007 BCD-Template
-rw------- 2 0 0 6815744 Sep 23 12:33 COMPONENTS -rw------- 1 0 0 262144 Sep 23 12:33 DEFAULT drwx------ 1 0 0 0 Nov 2 2006 Journal drwx------ 1 0 0 8192 Sep 23 12:33 RegBack
-rw------- 1 0 0 524288 Sep 23 12:33 SAM -rw------- 1 0 0 262144 Sep 23 12:33 SECURITY -rw------- 1 0 0 15728640 Sep 23 12:33 SOFTWARE -rw------- 1 0 0 9175040 Sep 23 12:33 SYSTEM drwx------ 1 0 0 4096 Nov 2 2006 TxR drwx------ 1 0 0 4096 Feb 27 2007 systemprofile
Select which part of registry to load, use predefined choices or list the files with space as delimiter 1 - Password reset [sam system security] 2 - RecoveryConsole parameters [software] q - quit - return to previous [1] :
Choice 1 is for password edit, most used. But if you wish, you can load any of the files (just enter it's name) and do manual registry edit on them.
But here, we select 1 for password edit, some files are copied around into memory and the edit application is invoked.
Selected files: sam system security Copying sam system security to /tmp
========================================================= ¤ Step THREE: Password or registry edit
========================================================= chntpw version 0.99.5 070923 (decade), (c) Petter N Hagen Hive name (from header): <\SystemRoot\System32\Config\SAM> ROOT KEY at offset: 0x001020 * Subkey indexing type is: 666c <lf> Page at 0x44000 is not 'hbin', assuming file contains garbage at end File size 524288 [80000] bytes, containing 11 pages (+ 1 headerpage) Used for data: 288/250904 blocks/bytes, unused: 15/23176 blocks/bytes.
Hive name (from header): <SYSTEM> ROOT KEY at offset: 0x001020 * Subkey indexing type is: 686c <lh> Page at 0x8b4000 is not 'hbin', assuming file contains garbage at end File size 9175040 [8c0000] bytes, containing 2117 pages (+ 1 headerpage) Used for data: 96982/6224016 blocks/bytes, unused: 4381/2830032 blocks/bytes.
Hive name (from header): <emRoot\System32\Config\SECURITY> ROOT KEY at offset: 0x001020 * Subkey indexing type is: 666c <lf> Page at 0x6000 is not 'hbin', assuming file contains garbage at end File size 262144 [40000] bytes, containing 5 pages (+ 1 headerpage) Used for data: 334/17312 blocks/bytes, unused: 7/3008 blocks/bytes.
* SAM policy limits: Failed logins before lockout is: 0 Minimum password length : 0 Password history count : 0
======== chntpw Main Interactive Menu ========
Loaded hives:
1 - Edit user data and passwords
2 - Syskey status & change
3 - RecoveryConsole settings
- - -
9 - Registry editor, now with full write support!
q - Quit (you will be asked if there is something to save)
What to do? [1] ->
This demo shows selection 1 for password edit, but you can also do other things. Note that 2, Syskey may be dangerous! AND NOT NEEDED TO RESET PASSWORDS! and does not work at all on Vista, but you get some info before you do any changes.
Selection 3, RecoveryConsole is only relevant for Win2k, XP and 2003 and you must have selected to load the SOFTWARE part of the registry (selection 2) earlier.
The manual registry editor is always available, it is not the most user-friendly thing, but anyway..
We continue our quest to change our "admin" users password..
===== chntpw Edit User Info & Passwords ====
| RID -|---------- Username ------------| Admin? |- Lock? --| | 03e8 | admin | ADMIN | | | 01f4 | Administrator | ADMIN | dis/lock | | 03ec | grumf1 | | | | 03ed | grumf2 | | | | 03ee | grumf3 | | | | 01f5 | Guest | | dis/lock | | 03ea | jalla1 | ADMIN | *BLANK* | | 03eb | jalla2 | | *BLANK* | | 03e9 | petro | ADMIN | *BLANK* |
This is a list of all local users on the machine. You may see more users here than in the overly user-friendly control panel, for example XP has some help and support built in users. The users marked "ADMIN" are members of the administrators group, which means they have admin rights, if you can login to one of them you can get control of the machine.
The buildt in (at install time in all windows versions) administrator is always RID 01f4. This example is from Vista, and Vista by default has this locked down (the installer instead asks and makes another user the regular use administrator, in this case RID 03e8)
The "lock?" collumn show if the user account is disabled or locked out (due to many logon attempts for example) or BLANK if the password seems to be blank.
We select to edit the "admin" user (this was the user made administrator by the Vista installer)
Select: ! - quit, . - list users, 0x - User with RID (hex) or simply enter the username to change: [Administrator] admin
RID : 1000 [03e8] Username: admin fullname: comment : homedir :
User is member of 1 groups: 00000220 = Administrators (which has 4 members)
Group 220 is THE BOSS GROUP! :)
Account bits: 0x0214 = [ ] Disabled | [ ] Homedir req. | [X] Passwd not req. | [ ] Temp. duplicate | [X] Normal account | [ ] NMS account | [ ] Domain trust ac | [ ] Wks trust act. | [ ] Srv trust act | [X] Pwd don't expir | [ ] Auto lockout | [ ] (unknown 0x08) | [ ] (unknown 0x10) | [ ] (unknown 0x20) | [ ] (unknown 0x40) |
Failed login count: 0, while max tries is: 0 Total login count: 3
Some status info, user is locked out if "Disabled" is set or "Failed login count" is larger than "max tries" policy setting. This user is not locked in any way. The lockout can be reset with option 4 below.
- - - - User Edit Menu: 1 - Clear (blank) user password 2 - Edit (set new) user password (careful with this on XP or Vista) 3 - Promote user (make user an administrator) (4 - Unlock and enable user account) [seems unlocked already] q - Quit editing user, back to user select Select: [q] > 1 Password cleared!
Here we just reset/clear/blank the password. But you can also try to set a new password with option 2, but it will only work if the password is not blank already. Also, it often fails to work on XP and newer systems.
Number 3 is to put a non-admin user into the administrators (220) group, thus making the user an administrator. IT IS STILL EXPERIMENTAL AND IT MAY sometimes RESULT IN STRANGE ERRORS WHEN LATER EDITING THE GROUP FROM WINDOWS! Also, usually pointless in promoting the Guest user, as it is most likely forbidden to log in by the security policy settings.
Select: ! - quit, . - list users, 0x - User with RID (hex) or simply enter the username to change: [Administrator] !
Exclamation point ! quits out (it's SHIFT 1 on the US keyboard layout used on the boot CD) Then we get back to the main menu, and select to quit..
======== chntpw Main Interactive Menu ========
Loaded hives: <sam> <system> <security>
1 - Edit user data and passwords
2 - Syskey status & change
3 - RecoveryConsole settings
- - -
9 - Registry editor, now with full write support!
q - Quit (you will be asked if there is something to save)
What to do? [1] -> q
Hives that have changed: # Name 0 - OK
========================================================= ¤ Step FOUR: Writing back changes
========================================================= About to write file(s) back! Do it? [n] : y
You must answer y, or the changes will not be saved. This is the last chance to change your mind!
Writing sam
Only changed files of the registry are actually written back.
If you forgot something, you may run again, else press CTRL-ALT-DEL to reboot.
***** EDIT COMPLETE *****
You can try again if it somehow failed, or you selected wrong New run? [n] : n
=========================================================
* end of scripts.. returning to the shell.. * Press CTRL-ALT-DEL to reboot now (remove floppy first) * or do whatever you want from the shell.. * However, if you mount something, remember to umount before reboot * You may also restart the script procedure with 'sh /scripts/main.sh'
(Please ignore the message about job control, it is not relevant)
BusyBox v1.1.0-pre1 (2005.12.30-19:45+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands.
sh: can't access tty; job control turned off And I got about a gazillion questions on this error message, even if it is mentioned in the FAQ It is from the shell telling it cannot do "job control" which means it cannot handle CTRL-C etc. It HAS NOTHING TO DO WITH YOUR PASSWORD RESET DID NOT WORK! That is caused by a lot of other things.
