Mencapai konversi
Membuat sistem file uji
Untuk menjaga sistem file utama kami dari kemungkinan kerusakan setelah menjalankan percobaan ini, kami akan membuat sistem file kecil di dalam file normal untuk tujuan pengujian.
Buat file tanpa isi yang disebut testdengan ukuran 10 megabita:
dd if=/dev/zero of=~/test bs=10M count=1
Buat sistem file Ext4 di dalam file, seolah-olah itu adalah partisi:
mkfs.ext4 ~/test
Membuat beberapa file dan direktori
Sekarang kita memiliki sistem file yang berfungsi penuh di dalam testfile, jadi kita akan membuat beberapa file dan direktori di dalamnya.
Pasang sistem file yang baru dibuat di dalam /mnt:
sudo mount ~/test /mnt
Buat file dan direktori:
sudo mkdir /mnt/folder
echo "contents" | sudo tee /mnt/file
Periksa isi sistem file:
ls -l /mnt
Outputnya harus seperti ini:
total 2
-rw-r--r-- 1 root root 0 may 21 18:53 file
drw-r--r-- 2 root root 1024 may 21 18:55 folder
Lepaskan sistem file uji:
sudo umount /mnt
Bertukar file dan folder
Jalankan debugfsmelawan testfile dengan izin tulis ( -wbendera):
debugfs -w ~/test
Konversikan fileke dalam folder:
Saat debugfsdiminta, ketik ini:
modify_inode file
Sebuah prompt akan muncul menanyakan mode; ketik ini:
040644
Terus menekan returnuntuk membiarkan data yang tersisa apa adanya hingga prompt muncul lagi.
Konversi foldermenjadi file:
Saat debugfsdiminta, ketik ini:
modify_inode folder
Sebuah prompt akan muncul menanyakan mode; ketik ini:
0100644
Terus menekan returnuntuk membiarkan data yang tersisa apa adanya hingga prompt muncul lagi.
Untuk keluar dari debugfsprompt, cukup tekan qdan kemudianreturn
Memeriksa keberhasilan operasi
Pasang kembali sistem file uji:
sudo mount ~/test /mnt
Periksa isi sistem file:
ls -l /mnt
Sekarang, itu harus memperlihatkan file seolah-olah itu adalah direktori dan sebaliknya :
total 2
drw-r--r-- 1 root root 0 may 21 18:53 file
-rw-r--r-- 2 root root 1024 may 21 18:55 folder
Script untuk menghitung mode inode
#!/bin/bash
#### See https://ext4.wiki.kernel.org/index.php/Ext4_Disk_Layout#Inode_Table
## Terminal measures:
x="$(( $(tput cols) / 2 ))" # Width of the terminal
y="$(( $(tput lines) / 2 ))" # Height of the terminal
## File descriptors:
declare -A types # Declare an associative array with file descriptors
types[f]='0x8000' # File
types[l]='0xA000' # Link
types[s]='0xC000' # Socket
types[d]='0x4000' # Directory
types[p]='0x1000' # Named pipe
types[b]='0x6000' # Block device
types[c]='0x2000' # Character device
## Permissions:
declare -A permission # Declare an associative array with permissions
permission[user_S]='0x800' # UID
permission[user_s]='0x840' # UID and user can execute
permission[user_r]='0x100' # User can read
permission[user_w]='0x80' # User can write
permission[user_x]='0x40' # User can execute
permission[group_S]='0x400' # GID
permission[group_s]='0x408' # GID and group can execute
permission[group_r]='0x20' # Group can read
permission[group_w]='0x10' # Group can write
permission[group_x]='0x8' # Group can execute
permission[other_T]='0x200' # Sticky bit
permission[other_t]='0x201' # Sticky bit and other can execute
permission[other_r]='0x4' # Other can read
permission[other_w]='0x2' # Other can write
permission[other_x]='0x1' # Other can execute
## Cleanup function:
function cleanup() {
tput cvvis # Make the cursor visible
tput rmcup # Restore saved terminal contents
stty sane # Fix problems caused by read -s
exit 0 # Exit gracefully
}
## Function to print at a specified position:
function pprint() {
tput cup $1 $2
printf "${@:3}"
}
## Function to clear the notification area:
function reset() {
pprint $((y+2)) $((x-40)) ' %.0s' {1..25} # Print 25 spaces
}
## Function to notify something to the user:
function notify() {
reset # Clear the notification area
pprint $((y+2)) $((x-40)) "$@" # Print the notification text
}
## If the terminal is smaller than 100x8, exit gracefully (self-explainatory):
if [ $x -lt 50 ] || [ $y -lt 5 ]; then
echo 'Error, I need a minimum of 100x10 lines to run'
exit 0
fi
## Initialize the terminal:
trap cleanup EXIT SIGHUP SIGINT SIGTERM # Call cleanup function after receiving ^C
stty -echo cbreak # Put terminal in silent mode
tput smcup # Save terminal contents
tput civis # Make the cursor inisible
## Draw the big box:
printf '\033[1;37m' # Color
pprint $((y-3)) $((x-48)) '\u2500%.0s' {1..97} # Upper line
pprint $((y+4)) $((x-48)) '\u2500%.0s' {1..97} # Lower line
for ((i=4;i>-4;i--)); do # Sides:
pprint $((y+i)) $((x-49)) '\u2502' # Left line
pprint $((y+i)) $((x+49)) '\u2502' # Right line
done # End sides
pprint $((y-3)) $((x-49)) '\u256D' # Upper-left corner
pprint $((y+4)) $((x-49)) '\u2570' # Lower-left corner
pprint $((y-3)) $((x+49)) '\u256E' # Upper-right corner
pprint $((y+4)) $((x+49)) '\u256F' # Lower-right corner
## Draw the small box:
printf '\033[1;35m' # Color
pprint $((y+1)) $((x-10)) '\u2501%.0s' {1..10} # Upper line
pprint $((y+3)) $((x-10)) '\u2501%.0s' {1..10} # Lower line
pprint $((y+2)) $((x-11)) '\u2503' # Left line
pprint $((y+2)) $((x+00)) '\u2503' # Right line
pprint $((y+1)) $((x-11)) '\u250F' # Upper-left corner
pprint $((y+3)) $((x-11)) '\u2517' # Lower-left corner
pprint $((y+1)) $((x+00)) '\u2513' # Upper-right corner
pprint $((y+3)) $((x+00)) '\u251B' # Lower-right corner
## Print type help:
pprint $((y-2)) $((x-44)) '\033[0;37mInode type: \033[1;37mf\033[0;37mile, \033[1;37md\033[0;37mirectory, \033[1;37ml\033[0;37mink, named \033[1;37mp\033[0;37mipe, \033[1;37ms\033[0;37mocket, \033[1;37mc\033[0;37mharacter device or \033[1;37mb\033[0;37mlock device.'
## Print permission help:
pprint $((y-1)) $((x-40)) '\033[0;36mPermission (\033[1;32mu\033[0;32mser\033[0;36m, \033[1;33mg\033[0;33mroup\033[0;36m or \033[1;31mo\033[0;31mther\033[0;36m): \033[1;36mr\033[0;36mead, \033[1;36mw\033[0;36mrite, e\033[1;36mx\033[0;36mecute, \033[1;36mhyphen\033[0;36m or \033[1;36mspace\033[0;36m to skip.'
pprint $((y+0)) $((x+8)) 's\033[1;36mt\033[0;36micky bit and executable, '
pprint $((y+1)) $((x+8)) 's\033[1;36mT\033[0;36micky bit not executable, '
pprint $((y+2)) $((x+8)) '\033[1;36ms\033[0;36metuid/setgid and executable, '
pprint $((y+3)) $((x+8)) '\033[1;36mS\033[0;36metuid/setgid not executable. '
## Endless loop:
while :; do
## Clear the input area:
pprint $((y+2)) $((x-10)) '% *s\n' 10 # Print 16 spaces
## Print mask in the input area:
printf '\033[1;37m' # Color for the type
pprint $((y+2)) $((x-10)) '\u2588' # Block for the type
printf '\033[1;36m' # Color for the permision
pprint $((y+2)) $((x- 9)) '\u2588%.0s' {1..9} # Blocks for the permission
## Loop through all variables to make a proper input:
for var in type {user,group,other}_{r,w,x}; do
## Assign colors and regex to fields:
case "$var" in
(type) color='\033[1;37m'; regex='^[fdlpscb]$' ;;
(other_x) regex='^[-xtT]$' ;;&
(user_x|group_x) regex='^[-xsS]$' ;;&
(user_[rw]|group_[rw]|other_[rw]) regex="^[-${var: -1}]$";;&
(user*) color='\033[1;32m' ;;
(group*) color='\033[1;33m' ;;
(other*) color='\033[1;31m' ;;
esac
## Change the pointer position:
pprint $((y+3)) $(((x-10)+pointer)) "${color}\u2501" # Print the pointer on its new position
if (( pointer > 0 )); then # If the pointer is not in the first position:
pprint $((y+3)) $(((x-10)+(pointer-1))) '\033[1;35m\u2501' # Clear the old pointer
fi
## Infinite loop until there is a valid input for the current character:
while :; do
printf "$color" # Set the character color
IFS= read -rn 1 $var # Read a character (even if it's a space)
declare $var="${!var// /-}" # Convert spaces to hyphens.
if [[ "$var" == "type" ]]; then # If the current variable is type:
declare $var="${!var//-/f}" # Convert "-" to "f"
fi
if [[ "${!var}" =~ $regex ]]; then # If there is a valid input:
reset # Clear error notification if any
break # Exit from this loop
else # Else:
notify "\033[1;31mWrong input!" # Print the error message
fi
done
## Print the entered value:
pprint $((y+2)) $(((x-10)+pointer)) "${!var}"
## Sum the current permission:
((mode+=permission[${var%_*}_${!var}]))
## Increment the pointer:
((pointer++))
done
## Post-read:
unset pointer # Reset the pointer
pprint $((y+3)) $((x-1)) "\033[1;35m\u2501" # Clear the pointer
read -n 1 # Wait for Return or another character
## Sum file descriptor type:
((mode+=${types[$type]}))
## Final commands:
mode=$(printf "%o" $mode) # Convert mode to octal (before this was decimal)
notify "\033[1;32mOctal mode:\033[1;34m $mode" # Print the octal mode
unset mode # Reset the mode
done
Lihat skrip di GitHub
Cacat
- Folder tidak terbuka. Anda tidak dapat membukanya kecuali jika Anda memasukkan "data folder mentah" yang berisi aslinya.
Bacaan lebih lanjut
https://ext4.wiki.kernel.org/index.php/Ext4_Disk_Layout#Inode_Table
Terima kasih kepada @tallus . Dia memberi saya petunjuk besar:
debugfs memiliki perintah mod_inode yang memungkinkan Anda untuk mengedit inode secara langsung yang memungkinkan Anda mengatur flag file ke dir.