Selama 3 hari terakhir (setelah pembaruan) Debian Jessie saya menolak untuk memasang disk NTFS. Saya menginstal ulang libfuse2 dan ntfs-3g, namun saya mendapatkan kesalahan Input / output yang sama
Saya mencoba disk yang sama di bawah Windows 7 dan OSX Mavericks (menggunakan ntfs-3g) dan mereka bekerja dengan baik. Saya membersihkan ntfs-3g dan diinstal ulang, dan masih masalah yang sama.
Disk terkadang akan dipasang dan terkadang tidak akan dipasang. Jika mereka melakukan mount, kadang-kadang saya bisa masuk ke direktori mount, sedangkan di waktu lain, saya mendapatkan error bash. Input / output error untuk direktori mount. Kali saya bisa masuk ke direktori mount, ketika saya mencoba ls-l, saya melihat banyak tanda tanya, bukan atribut file / dir.
Saya sudah mencoba ntfsfix dan chkdisk di bawah windows, dan mereka berdua melaporkan tidak ada masalah, hanya di bawah instalasi Jessie ini tiba-tiba saya tidak bisa memasang mereka dengan benar.
dmesg tidak memiliki info berguna selain disk eksternal yang dilampirkan:
[12816.210969] scsi 20:0:0:0: Direct-Access Seagate External SG16 PQ: 0 ANSI: 4
[12816.211825] sd 20:0:0:0: Attached scsi generic sg7 type 0
[12816.212542] sd 20:0:0:0: [sdg] 732566642 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[12816.213591] sd 20:0:0:0: [sdg] Write Protect is off
[12816.213595] sd 20:0:0:0: [sdg] Mode Sense: bf 00 00 00
[12816.214782] sd 20:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[12816.215561] sd 20:0:0:0: [sdg] 732566642 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[12816.242055] sdg: sdg1 sdg2
[12816.243244] sd 20:0:0:0: [sdg] 732566642 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[12816.246031] sd 20:0:0:0: [sdg] Attached SCSI disk
parted /dev/sdg 'print'
Model: Seagate External (scsi)
Disk /dev/sdg: 3001GB
Sector size (logical/physical): 4096B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 258kB 1038GB 1038GB primary
2 1038GB 3001GB 1962GB primary
fdisk -l /dev/sdg
Note: sector size is 4096 (not 512)
Disk /dev/sdg: 3000.6 GB, 3000592965632 bytes
255 heads, 63 sectors/track, 45600 cylinders, total 732566642 sectors
Units = sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00090a06
Device Boot Start End Blocks Id System
/dev/sdg1 63 253473569 1013894028 7 HPFS/NTFS/exFAT
/dev/sdg2 253473792 732566527 1916370944 83 Linux
mount -t ntfs-3g /dev/sdg1 /media/Downloads
ntfs-3g-mount: failed to access mountpoint /media/Downloads: Input/output error
Jika saya berhasil me-mount via
mount -t ntfs-3g /dev/sdg1 /media/Downloads
Setelah saya masukkan ke dalamnya:
cd media/Downloads
root@athena:/media/Downloads# ls -l
ls: reading directory .: Input/output error
total 0
root@athena:/media/Downloads#
mount Namun, mengatakan:
/dev/sdf1 on /media/Downloads type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
Apa yang saya rem?
EDIT
ntfsinfo -m /dev/sdg1
Volume is scheduled for check.
Please boot into Windows TWICE, or use the 'force' option.
NOTE: If you had not scheduled check and last time accessed this volume
using ntfsmount and shutdown system properly, then init scripts in your
distribution are broken. Please report to your distribution developers
(NOT to us!) that init scripts kill ntfsmount or mount.ntfs-fuse during
shutdown instead of proper umount.
Failed to open '/dev/sdg1'.
EDIT # 2
ntfsinfo -fm /dev/sdg1
WARNING: Dirty volume mount was forced by the 'force' mount option.
Volume Information
Name of device: /dev/sdg1
Device state: 11
Volume Name:
Volume State: 91
Volume Flags: 0x0001 DIRTY
Volume Version: 3.1
Sector Size: 4096
Cluster Size: 4096
Index Block Size: 4096
Volume Size in Clusters: 253473506
MFT Information
MFT Record Size: 4096
MFT Zone Multiplier: 0
MFT Data Position: 24
MFT Zone Start: 0
MFT Zone End: 31684192
MFT Zone Position: 4
Current Position in First Data Zone: 31684192
Current Position in Second Data Zone: 0
Allocated clusters 145403 (0.1%)
LCN of Data Attribute for FILE_MFT: 4
FILE_MFTMirr Size: 4
LCN of Data Attribute for File_MFTMirr: 126736753
Size of Attribute Definition Table: 2560
Number of Attached Extent Inodes: 0
FILE_Bitmap Information
FILE_Bitmap MFT Record Number: 6
State of FILE_Bitmap Inode: 80
Length of Attribute List: 0
Number of Attached Extent Inodes: 0
FILE_Bitmap Data Attribute Information
Decompressed Runlist: not done yet
Base Inode: 6
Attribute Types: not done yet
Attribute Name Length: 0
Attribute State: 3
Attribute Allocated Size: 31686656
Attribute Data Size: 31684192
Attribute Initialized Size: 31684192
Attribute Compressed Size: 0
Compression Block Size: 0
Compression Block Size Bits: 0
Compression Block Clusters: 0
Free Clusters: 199331046 (78.6%)
Saya akan mencoba memasangnya di bawah windows dalam beberapa jam (saya sedang menjalankan pemeriksaan pada disk lain saya tidak ingin mengganggu).
EDIT # 3
Saya kembali ke windows, dan memindai disk. Windows memang menemukan masalah dengan salah satunya, tetapi keduanya sudah diperbaiki, dapat dipasang dan dapat dijelajahi.
Namun, di bawah Debian, saya masih tidak bisa melakukan apa-apa. Saya membuka Gparted, dan cukup menarik, ia mengeluh:
Unable to read the contents of this file system!
Because of this some operations may be unavailable.
The cause might be a missing software package.
The following list of software packages is required for ntfs file system support: ntfsprogs / ntfs-3g.
Namun,
apt-cache policy ntfs-3g
ntfs-3g:
Installed: 1:2014.2.15AR.2-1
Candidate: 1:2014.2.15AR.2-1
Version table:
*** 1:2014.2.15AR.2-1 0
!!! Jadi, sudahkah saya mengalami bug ntfs-3g, atau sistem saya sekarang rusak ???
ntfsinfo