Kesalahan saat mencoba mengompilasi RStudio


8

Saya menggunakan Raspbian di Raspberry Pi 2 Model B

Saya telah mengikuti pedoman dalam Halaman Web RStudio dan juga dalam topik ini https://www.raspberrypi.org/forums/viewtopic.php?f=34&t=55828

sudo su
apt-get install git r-recommended
git clone https://github.com/rstudio/rstudio.git
cd rstudio
./dependencies/linux/install-dependencies-debian
mkdir build
cd build
cmake .. -DRSTUDIO_TARGET=Server -DCMAKE_BUILD_TYPE=Release
make install

Tetapi ketika melakukan cmake .. -DRSTUDIO_TARGET=Server -DCMAKE_BUILD_TYPE=Releaseitu membuat saya kesalahan ini:

CMake Error at src/cpp/session/CMakeLists.txt:23 (message):
  Dictionaries not found (re-run install-dependencies script to install)


-- Configuring incomplete, errors occurred!
See also "/home/pi/rstudio/build/CMakeFiles/CMakeOutput.log".
See also "/home/pi/rstudio/build/CMakeFiles/CMakeError.log".

Saya sudah mencoba menginstal ulang dependensi tetapi itu tidak membantu

Ini adalah log Kesalahan:

Determining if the function getpeereid exists failed with the following output:
Change Dir: /home/pi/rstudio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTryCompileExec3944045131/fast"
/usr/bin/make -f CMakeFiles/cmTryCompileExec3944045131.dir/build.make CMakeFiles/cmTryCompileExec3944045131.dir/build
make[1]: Entering directory '/home/pi/rstudio/build/CMakeFiles/CMakeTmp'
/usr/bin/cmake -E cmake_progress_report /home/pi/rstudio/build/CMakeFiles/CMakeTmp/CMakeFiles 1
Building C object CMakeFiles/cmTryCompileExec3944045131.dir/CheckFunctionExists.c.o
/usr/bin/cc   -DCHECK_FUNCTION_EXISTS=getpeereid   -o CMakeFiles/cmTryCompileExec3944045131.dir/CheckFunctionExists.c.o   -c /usr/share/cmake-3.0/Modules/CheckFunction$
Linking C executable cmTryCompileExec3944045131
/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec3944045131.dir/link.txt --verbose=1
/usr/bin/cc   -DCHECK_FUNCTION_EXISTS=getpeereid    CMakeFiles/cmTryCompileExec3944045131.dir/CheckFunctionExists.c.o  -o cmTryCompileExec3944045131 -rdynamic
CMakeFiles/cmTryCompileExec3944045131.dir/CheckFunctionExists.c.o: In function `main':
CheckFunctionExists.c:(.text+0x14): undefined reference to `getpeereid'
collect2: error: ld returned 1 exit status
CMakeFiles/cmTryCompileExec3944045131.dir/build.make:88: recipe for target 'cmTryCompileExec3944045131' failed
make[1]: *** [cmTryCompileExec3944045131] Error 1
make[1]: Leaving directory '/home/pi/rstudio/build/CMakeFiles/CMakeTmp'
Makefile:118: recipe for target 'cmTryCompileExec3944045131/fast' failed
make: *** [cmTryCompileExec3944045131/fast] Error 2

Apakah Anda tahu apa yang mungkin terjadi?

EDIT 1:

Ini adalah output dari menjalankan ./dependencies/linux/install-dependencies-debian:

root@raspberrypi:/home/pi/rstudio# ./dependencies/linux/install-dependencies-debian
Reading package lists... Done
Building dependency tree
Reading state information... Done
build-essential is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
pkg-config is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
fakeroot is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
cmake is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
uuid-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
libssl-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
libbz2-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
zlib1g-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'libpam0g-dev' instead of 'libpam-dev'
libpam0g-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
libxslt1-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
libapparmor1 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
apparmor-utils is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
libboost-all-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
libpango1.0-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package openjdk-6-jdk is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
  apt

E: Package 'openjdk-6-jdk' has no installation candidate

Ini memberitahu saya bahwa openjdk-6-jdk diperlukan tetapi tidak dalam repos. Saya telah menginstal openjdk-7-jdk secara manual, tetapi menginstalnya tidak berhasil.

Setelah melakukan itu, saya berkomentar (#) baris yang mencoba menginstal openjdk-6-jdk. Sekarang ini mengikuti menginstal paket dan ini adalah (baris terakhir) dari output:

Reading package lists... Done
Building dependency tree
Reading state information... Done
ant is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
unzip is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
./dependencies/linux/install-dependencies-debian: line 58: cd: ../common: No such file or directory

Saya sudah memasukkan lagi dalam file install-dependencies-linuxdan ini adalah baris yang gagal:

cd ../common
./install-common
cd ../linux

Tetapi saya tidak tahu apa yang mencoba untuk menginstal. Setelah baris ini, mulailah baris menginstal Qt tapi itu untuk versi Desktop RStudio, bukan versi Server saya.

EDIT 2:

Saya menemukan menggunakan perintah find / -name install-commonbahwa ada direktori umum di bawah direktori dependensi. Jadi saya cdmelakukan /dependencies/common/dan secara manual melakukan./install-common

root@raspberrypi:/home/pi/rstudio/dependencies/common# ./install-common
--2015-11-21 19:26:41--  https://s3.amazonaws.com/rstudio-buildtools/gin-1.5.zip
Resolving s3.amazonaws.com (s3.amazonaws.com)... 54.231.98.155
Connecting to s3.amazonaws.com (s3.amazonaws.com)|54.231.98.155|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1055663 (1.0M) [application/zip]
Saving to: ‘gin-1.5.zip’

gin-1.5.zip         100%[=====================>]   1.01M   951KB/s   in 1.1s

2015-11-21 19:26:43 (951 KB/s) - ‘gin-1.5.zip’ saved [1055663/1055663]

--2015-11-21 19:26:44--  https://s3.amazonaws.com/rstudio-buildtools/gwt-2.7.0.zip
Resolving s3.amazonaws.com (s3.amazonaws.com)... 54.231.9.24
Connecting to s3.amazonaws.com (s3.amazonaws.com)|54.231.9.24|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 108818328 (104M) [application/zip]
Saving to: ‘gwt-2.7.0.zip’

gwt-2.7.0.zip       100%[=====================>] 103.78M  7.80MB/s   in 20s

2015-11-21 19:27:04 (5.27 MB/s) - ‘gwt-2.7.0.zip’ saved [108818328/108818328]

--2015-11-21 19:27:36--  https://s3.amazonaws.com/rstudio-buildtools/junit-4.9b3.jar
Resolving s3.amazonaws.com (s3.amazonaws.com)... 54.231.49.132
Connecting to s3.amazonaws.com (s3.amazonaws.com)|54.231.49.132|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 247280 (241K) [application/java-archive]
Saving to: ‘junit-4.9b3.jar’

junit-4.9b3.jar     100%[=====================>] 241.48K   246KB/s   in 1.0s

2015-11-21 19:27:38 (246 KB/s) - ‘junit-4.9b3.jar’ saved [247280/247280]

--2015-11-21 19:27:38--  https://s3.amazonaws.com/rstudio-buildtools/selenium-java-2.37.0.zip
Resolving s3.amazonaws.com (s3.amazonaws.com)... 54.231.112.67
Connecting to s3.amazonaws.com (s3.amazonaws.com)|54.231.112.67|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 24625928 (23M) [application/zip]
Saving to: ‘selenium-java-2.37.0.zip’

selenium-java-2.37. 100%[=====================>]  23.48M  2.28MB/s   in 16s

2015-11-21 19:27:55 (1.45 MB/s) - ‘selenium-java-2.37.0.zip’ saved [24625928/24625928]

--2015-11-21 19:28:00--  https://s3.amazonaws.com/rstudio-buildtools/selenium-server-standalone-2.37.0.jar
Resolving s3.amazonaws.com (s3.amazonaws.com)... 54.231.114.92
Connecting to s3.amazonaws.com (s3.amazonaws.com)|54.231.114.92|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 34730734 (33M) [application/x-java-archive]
Saving to: ‘selenium-server-standalone-2.37.0.jar’

selenium-server-sta 100%[=====================>]  33.12M  4.39MB/s   in 8.6s

2015-11-21 19:28:10 (3.84 MB/s) - ‘selenium-server-standalone-2.37.0.jar’ saved [34730734/34730734]

--2015-11-21 19:28:10--  https://s3.amazonaws.com/rstudio-buildtools/chromedriver-mac
Resolving s3.amazonaws.com (s3.amazonaws.com)... 54.231.96.144
Connecting to s3.amazonaws.com (s3.amazonaws.com)|54.231.96.144|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 22034760 (21M) [application/octet-stream]
Saving to: ‘chromedriver-mac’

chromedriver-mac    100%[=====================>]  21.01M  5.39MB/s   in 4.8s

2015-11-21 19:28:15 (4.34 MB/s) - ‘chromedriver-mac’ saved [22034760/22034760]

--2015-11-21 19:28:15--  https://s3.amazonaws.com/rstudio-buildtools/chromedriver-linux
Resolving s3.amazonaws.com (s3.amazonaws.com)... 54.231.97.227
Connecting to s3.amazonaws.com (s3.amazonaws.com)|54.231.97.227|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 19303552 (18M) [application/octet-stream]
Saving to: ‘chromedriver-linux’

chromedriver-linux  100%[=====================>]  18.41M  2.53MB/s   in 9.4s

2015-11-21 19:28:25 (1.95 MB/s) - ‘chromedriver-linux’ saved [19303552/19303552]

--2015-11-21 19:28:25--  https://s3.amazonaws.com/rstudio-buildtools/chromedriver-win.exe
Resolving s3.amazonaws.com (s3.amazonaws.com)... 54.231.13.152
Connecting to s3.amazonaws.com (s3.amazonaws.com)|54.231.13.152|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 6731776 (6.4M) [application/octet-stream]
Saving to: ‘chromedriver-win.exe’

chromedriver-win.ex 100%[=====================>]   6.42M  2.52MB/s   in 2.6s

2015-11-21 19:28:29 (2.52 MB/s) - ‘chromedriver-win.exe’ saved [6731776/6731776]

--2015-11-21 19:28:29--  https://s3.amazonaws.com/rstudio-dictionaries/core-dictionaries.zip
Resolving s3.amazonaws.com (s3.amazonaws.com)... 54.231.10.192
Connecting to s3.amazonaws.com (s3.amazonaws.com)|54.231.10.192|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 876339 (856K) [application/zip]
Saving to: ‘core-dictionaries.zip’

core-dictionaries.z 100%[=====================>] 855.80K  1.00MB/s   in 0.8s

2015-11-21 19:28:31 (1.00 MB/s) - ‘core-dictionaries.zip’ saved [876339/876339]

--2015-11-21 19:28:31--  https://s3.amazonaws.com/rstudio-buildtools/mathjax-23.zip
Resolving s3.amazonaws.com (s3.amazonaws.com)... 54.231.1.152
Connecting to s3.amazonaws.com (s3.amazonaws.com)|54.231.1.152|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1674748 (1.6M) [application/zip]
Saving to: ‘mathjax-23.zip’

mathjax-23.zip      100%[=====================>]   1.60M   578KB/s   in 2.8s

2015-11-21 19:28:35 (578 KB/s) - ‘mathjax-23.zip’ saved [1674748/1674748]

1.50.0 already installed in /opt/rstudio-tools/boost/boost_1_50_0
--2015-11-21 19:28:35--  https://s3.amazonaws.com/rstudio-buildtools/pandoc-1.13.1.zip
Resolving s3.amazonaws.com (s3.amazonaws.com)... 54.231.64.184
Connecting to s3.amazonaws.com (s3.amazonaws.com)|54.231.64.184|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 115697042 (110M) [application/zip]
Saving to: ‘pandoc-1.13.1.zip’

pandoc-1.13.1.zip   100%[=====================>] 110.34M  1.99MB/s   in 44s

2015-11-21 19:29:20 (2.52 MB/s) - ‘pandoc-1.13.1.zip’ saved [115697042/115697042]

cp: cannot stat ‘pandoc-1.13.1/linux/debian/armv7l/pandoc*’: No such file or directory

Dan sekarang ketika saya melakukan lagi cmake ini adalah output:

root@raspberrypi:/home/pi/rstudio/build# cmake .. -DRSTUDIO_TARGET=Server -DCMAKE_BUILD_TYPE=Release
-- Boost version: 1.50.0
-- Found R: /usr/lib/R
CMake Error at src/cpp/session/CMakeLists.txt:32 (message):
  rsconnect package not found (re-run install-dependencies script to install)


-- Configuring incomplete, errors occurred!
See also "/home/pi/rstudio/build/CMakeFiles/CMakeOutput.log".
See also "/home/pi/rstudio/build/CMakeFiles/CMakeError.log".

Setidaknya sekarang ia melempar kesalahan di baris yang berbeda!

EDIT 3:

Saya menginstal secara manual dependensi di dalam install-commondan sekarang perintah cmake bekerja! Yay!

Sekarang saya telah melakukan make installtetapi macet di sini:

Buildfile: /home/pi/rstudio/src/gwt/build.xml

ext:

1
Pertanyaan lama (mati) di sini ... Output apa yang Anda dapatkan dari instalasi dependensi (begitu apt-get ...dan ./dependencies/linux/install-dependencies-debian)?
Wilf

@ Willf Terima kasih banyak atas komentar Anda. Saya telah mengedit pertanyaan,
Sergio Fernández

@ Willf Dan maaf, output dari apt-get ...semuanya baik-baik saja. git is already the newest version. r-recommended is already the newest version.
Sergio Fernández

1
Hanya titik taksonomis - untuk catatan Anda memiliki Raspberry Pi Model B + atau Raspberry Pi 2 Model B - yang kedua memiliki tiga inti prosesor (dan dua kali memori IIRC) ...
SlySven

Maaf, saya menulis Raspberry Pi 2 Model B + di bagian atas posting ini. Maksud saya Raspberry Pi 2 Model B. Sekarang benar, terima kasih.
Sergio Fernández

Jawaban:


6

Dengan menggunakan beberapa tip dari utas ini (terima kasih!), Utas Stack Overflow lainnya, instal ARM lainnya (pada Chromebook), dan banyak percobaan dan kesalahan, saya bisa mendapatkan RStudio Server v0.99.491 dan berjalan pada saya Pi 2.

Sergio, apa yang saya pikir Anda lewatkan adalah:

  1. Instal pandoc secara manual.

    sudo apt-get install -y pandoc
    
  2. Kompiler GWT baru. Proses di bawah ini akan bervariasi tergantung pada bagaimana Anda mengatur direktori Anda. Pada dasarnya, unduh kompiler terbaru, unzip, dan pindahkan ke folder "kompiler".

    cd ~/downloads
    wget http://dl.google.com/closure-compiler/compiler-latest.zip
    unzip compiler-latest.zip
    rm COPYING README.md compiler-latest.zip
    sudo mv compiler.jar /home/pi/downloads/rstudio/src/gwt/tools/compiler/compiler.jar
    
  3. Berpotensi, ruang SWAP. Saya mendapatkan hasil yang beragam untuk dikompilasi dengan dan tanpa SWAP. Yang saya tahu adalah, saya menggunakan SWAP untuk mendapatkan instalasi yang saya miliki sekarang.

Untuk orang lain yang mungkin mengalami kesulitan mengikuti proses di atas, saya melakukan yang terbaik untuk mengkompilasinya. CATATAN: ini akan membawa JAM ke ./install-commondan make install. Saya pikir butuh hampir 4,5 jam untuk membangun make install.

sudo su
apt-get update
apt-get upgrade -y
apt-get install -y git r-recommended
cd /home/pi/downloads/
git clone https://github.com/rstudio/rstudio.git
cd /home/pi/downloads/rstudio/dependencies/common/
./install-common
cd /home/pi/downloads/rstudio/dependencies/linux/
./install-dependencies-debian

#saw java 6 was not installed. installed v7
apt-get install -y openjdk-7-jdk

#tried to make install, got an error about dictionaries not installed and rerun install-dependencies
cd /home/pi/downloads/rstudio/dependencies/common/
./install-common

#tried to make install, hangs at "ext:" so I tried manually installing pandoc, which should have been installed earlier, but apparently was not
apt-get install -y pandoc

#tried to make install, hangs at "ext:" so I tried installing the latest GWT compiler
cd ~/downloads
wget http://dl.google.com/closure-compiler/compiler-latest.zip
unzip compiler-latest.zip
rm COPYING README.md compiler-latest.zip
mv compiler.jar /home/pi/downloads/rstudio/src/gwt/tools/compiler/compiler.jar

#build and install works!
cd /home/pi/downloads/rstudio/
#remove build if exists
rm -r ./build
mkdir build
cmake -DRSTUDIO_TARGET=Server -DCMAKE_BUILD_TYPE=Release
make install

Saya harus menambahkan bahwa ada beberapa langkah lagi untuk mendapatkan server dan menjalankan, tetapi ini adalah di mana saya membayangkan kebanyakan orang terjebak. Berikut langkah-langkah selanjutnya yang diambil dari build ARM jrowen di Chromebook :

# Additional install steps
sudo useradd -r rstudio-server
sudo cp /usr/local/lib/rstudio-server/extras/init.d/debian/rstudio-server /etc/init.d/rstudio-server
sudo chmod +x /etc/init.d/rstudio-server 
sudo ln -f -s /usr/local/lib/rstudio-server/bin/rstudio-server /usr/sbin/rstudio-server
sudo chmod 777 -R /usr/local/lib/R/site-library/

# Setup locale
sudo apt-get install -y locales
sudo DEBIAN_FRONTEND=noninteractive dpkg-reconfigure locales
export LANG=en_US.UTF-8
export LANGUAGE=en_US.UTF-8
#echo 'export LANG=en_US.UTF-8' >> ~/.bashrc
#echo 'export LANGUAGE=en_US.UTF-8' >> ~/.bashrc

# Clean the system of packages used for building
sudo apt-get autoremove -y cabal-install ghc openjdk-7-jdk pandoc libboost-all-dev
sudo rm -r -f ~/rstudio-$VERS
sudo apt-get autoremove -y

# Start the server
sudo rstudio-server start

# Go to localhost:8787

Selamat datang di sudut rasa Raspberry Pi dari komunitas Stack Exchange. Ini sepertinya jawaban yang ditulis dengan sopan kepada saya!
SlySven

1

3 tahun kemudian, berdasarkan jawaban dhewlett, saya dapat membangun RStudio 1.1.463 di Raspbian Stretch. Saya telah memasukkan semuanya ke dalam docker build untuk kemudahan reproduksi. Itu datang dalam beberapa bagian.

Pertama buat lingkungan build untuk RStudio. Dockerfile.build_env terlihat seperti ini:

FROM balenalib/raspberrypi3-debian:stretch-build as build_env

ARG VERSION_MAJOR=1
ARG VERSION_MINOR=1
ARG VERSION_PATCH=463
ARG PACKAGE_RELEASE=1
ARG VERSION_TAG=${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_PATCH}

RUN apt-get update && apt-get upgrade -y && apt-get install -y \
      galternatives \
      git \
      openjdk-8-jdk \
      pandoc \
      pandoc-citeproc \
      python-dev \
      r-recommended

RUN mkdir -p /home/pi/Downloads
WORKDIR /home/pi/Downloads

# Get the RStudio sources. We only download the version of the code we need,
# instead of HEAD. HEAD has dependencies that RaspberryPi3 Debian (v9 Stretch)
# currently doesn't satisfy, e.g. QT >= 5.10.
RUN set -x \
    && wget https://github.com/rstudio/rstudio/archive/v${VERSION_TAG}.tar.gz -O rstudio.tgz \
    && tar xzf rstudio.tgz \
    && rm rstudio.tgz \
    && ln -s rstudio-${VERSION_TAG} rstudio

WORKDIR /home/pi/Downloads/rstudio/dependencies/linux
# We're going to use the system version of the boost library (version
# 1.62.0) instead of installing and building the RStudio version of boost
# (version 1.63.0) which takes several hours of build time.
RUN perl -i -pe 's/(^.*install-boost$)/# \1/s' ../common/install-common
RUN apt-get install libboost-all-dev
# Script installs qt-sdk only for x86 but we need armhf, so skip qt install.
RUN ./install-dependencies-debian --exclude-qt-sdk
# Extra dependencies to build rstudio-desktop: use the system QT libraries instead.
RUN apt-get install -y \
      libqt5opengl5-dev \
      libqt5sensors5-dev \
      libqt5svg5-dev \
      libqt5webkit5-dev \
      libqt5xmlpatterns5-dev \
      qt5-default \
      qt5-style-plugins \
      qtpositioning5-dev \
      qtwebengine5-dev

WORKDIR /home/pi/Downloads/rstudio
# Package building wants to grab QT library files to bundle them with the
# RStudio desktop .deb package. But bundling of system QT doesn't work due
# to path differences and is unnecessary anyway.
RUN sed -i -e 's#\(set(RSTUDIO_BUNDLE_QT\) TRUE#\1 FALSE#' src/cpp/desktop/CMakeLists.txt
# Add the package dependencies to system QT libraries.
RUN sed -i -e 's#\(^.*set(RSTUDIO_DEBIAN_DEPENDS "${RSTUDIO_DEBIAN_DEPENDS}libgstreamer0.10.*$\)#\1\nset(RSTUDIO_DEBIAN_DEPENDS "${RSTUDIO_DEBIAN_DEPENDS}libqt5webchannel5, libqt5webkit5, libqt5positioning5, libqt5sensors5, libqt5svg5, libqt5xml5, libqt5xmlpatterns5, ")#' package/linux/CMakeLists.txt
# Add our own package release (aka. Debian revision number) to the .deb file.
RUN sed -i -e 's#\(^.*\)-\(${PACKAGE_ARCHITECTURE}\)#set(CPACK_DEBIAN_PACKAGE_RELEASE "'${PACKAGE_RELEASE}'")\n\1-${CPACK_DEBIAN_PACKAGE_RELEASE}_\2#' package/linux/CMakeLists.txt

# Constrain gwtc compiler to use a single worker - gwtc is a memory hog and
# running multiple workers is getting too tight with 1 GB RAM + 1 GB swap.
RUN perl -0777 -i -pe 's#(<arg value="-localWorkers"/>\s+<arg value=)"\d+"(/>)#\1"1"\2#s' src/gwt/build.xml

# Change "cmake_policy(SET CMP0020 OLD)" to "cmake_policy(SET CMP0043 OLD)"
# to avoid a build time complaint.
RUN sed -i -e s/CMP0020/CMP0043/g src/cpp/desktop/CMakeLists.txt

# We build in a separate directory.
RUN mkdir build

Dan bangun citra itu dengan:

docker build -t raspberrypi-rstudio-build-env -f Dockerfile.build_env .

Kemudian bangun paket Debt RStudio Server dengan Dockerfile.server_deb:

# The compilation, especially gwtc (java), needs a lot of memory so you need
# to add more swap on your RP3 in order for the compile to succeed:
#   * In /etc/dphys-swapfile set CONF_SWAPSIZE=1024 (default is 100)
#   * Then run sudo service dphys-swapfile restart
#   * Once the build is done and you're happy with the result you can set
#     the swap space back to the default 100 MB with:
#     * In /etc/dphys-swapfile set CONF_SWAPSIZE=100
#     * sudo service dphys-swapfile restart

FROM raspberrypi-rstudio-build-env as build_env

ARG VERSION_MAJOR=1
ARG VERSION_MINOR=1
ARG VERSION_PATCH=463
ARG PACKAGE_RELEASE=1
ARG VERSION_TAG=${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_PATCH}
ARG BUILD_TAG=${VERSION_TAG}-${PACKAGE_RELEASE}

# Build only with parallelism 2 - gwtc is a memory hog. If you still run out
# of memory override this to 1.
ARG BUILD_PARALLELISM=2

WORKDIR /home/pi/Downloads/rstudio/build

RUN set -x \
    && cmake .. \
      -DRSTUDIO_TARGET=Server \
      -DCMAKE_BUILD_TYPE=Release \
      -DRSTUDIO_PACKAGE_BUILD=1 \
      -DRSTUDIO_BOOST_VERSION=1.62.0 \
      -DRSTUDIO_USE_SYSTEM_BOOST=1 \
    && make preinstall -j${BUILD_PARALLELISM}
# Create the deb package. Unfortunately cpack wants to rerun the whole build,
# so we'll work around that by giving it an empty build rule.
# (There really should be a better way to avoid the rebuild.)
RUN set -x \
    && mv Makefile Makefile.orig \
    && echo 'preinstall:' > Makefile \
    && cpack -G DEB \
    && mv Makefile.orig Makefile
# The product of this build is: rstudio-server-${BUILD_TAG}_armhf.deb

# Extract only the finished Debian package and leave it in an empty docker
# image to reduce image size. If you want to capture the package in its
# build environment, build it only to stage --target=build_env
FROM scratch as package

# ARGs need to be redefined in every build stage to be accessible.
ARG VERSION_MAJOR=1
ARG VERSION_MINOR=1
ARG VERSION_PATCH=463
ARG PACKAGE_RELEASE=1
ARG VERSION_TAG=${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_PATCH}
ARG BUILD_TAG=${VERSION_TAG}-${PACKAGE_RELEASE}

COPY --from=build_env /home/pi/Downloads/rstudio/build/rstudio-server-${BUILD_TAG}_armhf.deb /

Buat gambar itu dan ekstrak paket RStudio Server Debian:

docker build -t raspberrypi-rstudio-server-deb -f Dockerfile.server_deb .
docker image save raspberrypi-rstudio-server-deb | tar xO --wildcards '*/layer.tar' | tar x

Demikian pula untuk Paket Debian RStudio Desktop Anda akan menggunakan Dockerfile.desktop_deb:

FROM raspberrypi-rstudio-build-env as build_env

ARG VERSION_MAJOR=1
ARG VERSION_MINOR=1
ARG VERSION_PATCH=463
ARG PACKAGE_RELEASE=1
ARG VERSION_TAG=${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_PATCH}
ARG BUILD_TAG=${VERSION_TAG}-${PACKAGE_RELEASE}

# Build only with parallelism 2 - gwtc is a memory hog. If you still run out
# of memory override this to 1.
ARG BUILD_PARALLELISM=2

WORKDIR /home/pi/Downloads/rstudio/build

RUN set -x \
    && cmake .. \
      -DRSTUDIO_TARGET=Desktop \
      -DCMAKE_BUILD_TYPE=Release \
      -DRSTUDIO_PACKAGE_BUILD=1 \
      -DRSTUDIO_BOOST_VERSION=1.62.0 \
      -DRSTUDIO_USE_SYSTEM_BOOST=1 \
      -DQT_QMAKE_EXECUTABLE=/usr/lib/arm-linux-gnueabihf/qt5/bin/qmake \
    && make preinstall -j${BUILD_PARALLELISM}
# Create the deb package. Unfortunately cpack wants to rerun the whole build,
# so we'll work around that by giving it an empty build rule.
# (There really should be a better way to avoid the rebuild.)
RUN set -x \
    && mv Makefile Makefile.orig \
    && echo 'preinstall:' > Makefile \
    && cpack -G DEB \
    && mv Makefile.orig Makefile
# The product of this build is: rstudio--${BUILD_TAG}_armhf.deb

# Comment out next line for native build.
RUN [ "cross-build-end" ]

# Extract only the finished Debian package and leave it in an empty docker
# image to reduce image size. If you want to capture the package in its
# build environment, build it only to stage --target=build_env
FROM scratch as package

# ARGs need to be redefined in every build stage to be accessible.
ARG VERSION_MAJOR=1
ARG VERSION_MINOR=1
ARG VERSION_PATCH=463
ARG PACKAGE_RELEASE=1
ARG VERSION_TAG=${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_PATCH}
ARG BUILD_TAG=${VERSION_TAG}-${PACKAGE_RELEASE}

COPY --from=build_env /home/pi/Downloads/rstudio/build/rstudio--${BUILD_TAG}_armhf.deb /

Buat gambar itu dan ekstrak paket RStudio Desktop Debian:

docker build -t raspberrypi-rstudio-desktop-deb -f Dockerfile.desktop_deb .
docker image save raspberrypi-rstudio-desktop-deb | tar xO --wildcards '*/layer.tar' | tar x

Akhirnya, instal paket deb dengan. Apt yang juga menarik dalam paket dependen. Pastikan untuk memperbarui daftar paket terlebih dahulu:

sudo apt-get update
sudo apt install ./rstudio-server-1.1.463-1_armhf.deb
sudo apt install ./rstudio--1.1.463-1_armhf.deb
Dengan menggunakan situs kami, Anda mengakui telah membaca dan memahami Kebijakan Cookie dan Kebijakan Privasi kami.
Licensed under cc by-sa 3.0 with attribution required.